- Joined
- Aug 2, 2000
- Messages
- 11,465
I am hoping to get an M permit. The car was going to be on display at the AGP but it seems that it needs rego or a club or rally permit neither of which it will have before then.
Does the GTi6 ECU have a road speed input?
Does the GTi6 ECU have a road speed input?
I too would like to get onto Club M plates, in preference to the more restrictive rally rego. The main issue I foresee is that my roll cage impedes entry and exit because it is more than 140mm from the bottom of the seat.
But that's my reading of the scenario, once I get everything roadworthy, I will take it to a 'friendly' RWC guy to see what they think.
In regards to the speed sender, it has never worked since i installed the gearbox, thinking it might not have the right set of adapters to turn the sender (either the driveshaft or the gears attached to the sender) lucky my spare boxes should have those parts. As a result, I have a huge flat spot down low in the rev range, but I don't really want to be there anyway.
Michael.
Sent from my iPhone using Tapatalk