That is a great website
Looks like he did it without going OHC too. Simplifies it somewhat.
Wonder what's going on inside this engine:
https://www.carandclassic.co.uk/car/C1104852
Last edited:
That is a great website
When I last went down this road I recall the Toyota 4A-GE has 89mm bore spacing - Nissan KA24DE also, I think.
Anyone have an old Toyota Corolla head gasket to try on for size?
The Ford Sigma is 87mm, 1.6 DOHC 16V as used in Focus and Fiesta. I've been through about 80 Ford heads and it's the closest I can find.
Figuring out the cam drive and ignition if using a dizzy could be trickier.
.
Seeing as we are going all out here we might as well hire these guys to build us the ultimate head to go on our 807 block.
https://www.freevalve.com/
Not 807 at all, but interesting
https://historicmotorsportcentral.com/2015/07/06/tech-the-apfelbeck-cylinder-head/
Lookie here and other places BowieDid any manufacture experiment with a sliding valve?
I'm imagining a 2 stroke with just a giant plate or 2 moving backwards and forwards like what BMW did and there slide throttles.