I thought that I would continue the finishing touches, fabrication wise, in preparation on our Classic Alpine Tour. One of the things that were bugging me is the water expansion bottle. We got the car without it.
An R5 plastic bottle was used in the interim but because it is mounted so close to the extractors, it was a continuous worry. Not so much on the open road but in town where the airflow was limited.
A quick call to the Matra guys and I had the dimensions. On the photos you'll see what is needed. I have started the fabrication proses by measuring the first cut. I'll add to the proces as I go along.
Frans.
An R5 plastic bottle was used in the interim but because it is mounted so close to the extractors, it was a continuous worry. Not so much on the open road but in town where the airflow was limited.
A quick call to the Matra guys and I had the dimensions. On the photos you'll see what is needed. I have started the fabrication proses by measuring the first cut. I'll add to the proces as I go along.
Frans.