Power your reversing camera off the reversing lights.
The camera will only draw a few milliamps and should not upset nor overload the multiplex switching.
You may get some disturbance on the screen when reverse is first selected due to the camera initialising but that should not be a problem.
You will still need to run a video a feed to the ICE unit, unless you can find and use the factory fitted cable.
The camera will only draw a few milliamps and should not upset nor overload the multiplex switching.
You may get some disturbance on the screen when reverse is first selected due to the camera initialising but that should not be a problem.
You will still need to run a video a feed to the ICE unit, unless you can find and use the factory fitted cable.