How I Overcame the Meshing Problem
Check out posts 148-156
http://www.aussiefrogs.com/forum/restoration-projects/115151-peugeot-404-utility-project-7.html
My meshing problems were so hard I removed the gear box, torque tube, rear axle and springs & then joined everything up on the workshop floor where the meshing was a breeze.
I made a simple lifting rig with scissor jacks on dollies with castors and lifted the whole assembly into place in one piece.
It sounds like overkill I guess but it went really easily.
Check out posts 148-156
http://www.aussiefrogs.com/forum/restoration-projects/115151-peugeot-404-utility-project-7.html
My meshing problems were so hard I removed the gear box, torque tube, rear axle and springs & then joined everything up on the workshop floor where the meshing was a breeze.
I made a simple lifting rig with scissor jacks on dollies with castors and lifted the whole assembly into place in one piece.
It sounds like overkill I guess but it went really easily.