What's happening with the mechanical components?
I will take the gearbox soon to a transmission shop in Victoria BC to have the bearings and seals replaced. I will disassemble the engine around that time and start the work on it. I have new high compression pistons in an 0111.31 set from Peugeot but before reassembling it, the block needs to be be boiled out and painted, the crank sludge traps need to be removed and oiling channels cleared, crank inspected and ground if necessary. I have a brand new 8 port head but the valve seats must be replaced with hardened ones, so I will need to send that out around the same time.
The suspension is totally rebuilt with new parts now, including new Peugeot front dampers. The braking system is Hydrovac and I have a NOS Hydrovac booster and rebuild kits for all cylinders, new brake hoses.
The upholstery needs to be done too. Leather is incorrect for a Coupé but I am thinking I'll get light grey leather for the seats.