Just wondering whats involved in converting a 604 to a manual. I read through some past posts and from what I can understand is that a reasonbly straight forward job. mallet
The main queries I have are the following:
1) A BA10/5 or 7/5 would be the most suitable, would a BA7/4 handle the job.
2) What bellhousing and clutch would be required.
3) conversion of the pedal box and installation of a clutch slave cylinder
4) connection of the reversing lights
and anything else I haven't thought of
cheers!
The main queries I have are the following:
1) A BA10/5 or 7/5 would be the most suitable, would a BA7/4 handle the job.
2) What bellhousing and clutch would be required.
3) conversion of the pedal box and installation of a clutch slave cylinder
4) connection of the reversing lights
and anything else I haven't thought of
cheers!