Hey my froggies friend,
I had an issue with my reverse light for ages now.
This week end I had a bid of time and starts to investigate.
The light bulb first are Ok, the F1 fuse is Ok too, but no 12V is going to the lights.
Thanks to an other post here I started to look at the reverse switch on the gearbox.
I bridge the connector and it’s now working.
I clean the connection and also try to test the switch, it seems to fail.
So I guess I’m good to buy a new switch.
1/ any chance to salvage the switch, I’m more keen to get a new one.
2/ Where to buy that and to make sure it the right one?
3/ I tried the removed the switch but it seems to be a 22mm deep socket to do so. Am I right ?
Any other check you will do before buying a new switch.
Thanks guys.
Remi
Sent from my iPhone using Tapatalk
I had an issue with my reverse light for ages now.
This week end I had a bid of time and starts to investigate.
The light bulb first are Ok, the F1 fuse is Ok too, but no 12V is going to the lights.
Thanks to an other post here I started to look at the reverse switch on the gearbox.
I bridge the connector and it’s now working.
I clean the connection and also try to test the switch, it seems to fail.
So I guess I’m good to buy a new switch.
1/ any chance to salvage the switch, I’m more keen to get a new one.
2/ Where to buy that and to make sure it the right one?
3/ I tried the removed the switch but it seems to be a 22mm deep socket to do so. Am I right ?
Any other check you will do before buying a new switch.
Thanks guys.
Remi
Sent from my iPhone using Tapatalk