I am looking into the possibility of putting some Chinese Carillo copy conrods in an evenfire 2975cc engine I will eventually build. Many years ago John Lane in the US put plenty of boost into an evenfire PRV resulting in good power and bent conrods. Detonation perhaps? He said that with aftermarket conrods he had no trouble.
My engine block is from an evenfire Volvo760 2850cc which I will be using Renault Alpine GTA turbo heads and manifolding on, using the Volvo cams and a set of 93mm Alpine A610 pistons with the Volvo crank which has 10mm more stroke than the original GTA Turbo. The way the Chinese ones are advertised it makes out the even and odd fire are the same.
I don't know if these are Chinese, an Australian company, but a whole lot more expensive than the Chinese ones. https://ppmracing.com.au/product/renault-prv-v6-3-0l-h-beam-connecting-rods/
These are Chinese. https://www.alibaba.com/product-det...offerlist.normal_offer.d_title.e3f76837BLMGfw
Different heading. https://www.alibaba.com/product-det...offerlist.normal_offer.d_title.e3f76837BLMGfw
Says min 18 but seems to accept 6 at more cost. $429 USD including freight for 1 set.
My engine block is from an evenfire Volvo760 2850cc which I will be using Renault Alpine GTA turbo heads and manifolding on, using the Volvo cams and a set of 93mm Alpine A610 pistons with the Volvo crank which has 10mm more stroke than the original GTA Turbo. The way the Chinese ones are advertised it makes out the even and odd fire are the same.
I don't know if these are Chinese, an Australian company, but a whole lot more expensive than the Chinese ones. https://ppmracing.com.au/product/renault-prv-v6-3-0l-h-beam-connecting-rods/
These are Chinese. https://www.alibaba.com/product-det...offerlist.normal_offer.d_title.e3f76837BLMGfw
Different heading. https://www.alibaba.com/product-det...offerlist.normal_offer.d_title.e3f76837BLMGfw
Says min 18 but seems to accept 6 at more cost. $429 USD including freight for 1 set.