Peugeot 207 Intercooler

thatguy

thatguy

Member
VIP Paid Subscriber
Fellow Frogger
Joined
Oct 23, 2012
Messages
211
Location
Blue Mts
Seat Ibiza Cupra intercooler purchased new from Spain approx 2.5 years ago and previously fitted to one of our 207GTIs.

Its approx 3 times the size of the factory IC and made a big difference to performance especially in warmer weather as the car ran a remap. This was the IC swap recommended by etuners who were the pioneers of tinkering with the EP6 turbos - see https://www.etuners.gr/peugeot-207-1-6-thp-rc-gti-gt-seat-ibiza-cupra-intercooler/

Was removed from the car prior to sale and now surplus to needs. Per the photos has a small ding on one side (happened during delivery from Spain when we purchased it) that does not affect its use at all. Other very clean.

Cost ~$500 will sell for $200. Located in Faulconbridge in Blue Mts. Would be happy to package and courier/post at buyers expense.

IMG_20220709_114548764.jpg


IMG_20220709_114618236.jpg


IMG_20220709_114608599.jpg


IMG_20220709_114553992.jpg


IMG_20220709_114602751.jpg
 
Yes its big and does a great job of cooling.

It is positioned in front of the AC radiator and behind the black crash bar. Just make up some simple L brackets to mount it to the top and bottom fittings on the IC though it kind of wedges in even without them. You need to add 2 x silicon 90 degree elbows and a 2 x short aluminium pipes which drop down from the factory convoluted rubber joiners through where the factory IC sits to join with the two elbows. There used to be a very good guide on the etuners website but all their pictures went away - it's pretty logical when you take the factory IC out and look at it.
 
You must log in or register to reply here.
Top