PCV Valve on ID19

[crompo]

Good evening, I have a problem with my 1962 ID19 with engine fumes entering the cabin. At high speeds there is not problem, the fumes begin entering when driving in town or at idle. I have filled all cavities with sealant where possible but the problem persists. From material I have read if I fitted a PCV Valve (Positive Crankcase Ventilation) it would solve my problems. Therefore rather than reinvent the wheel I though maybe somebody in your neck of the woods has already performed this procedure and could offer some advice.
Thanks,

 

[DoubleChevron]

You would just need to block off or use the existing vents and fit the valve. its probably going to be easiest to fit a ford valve in there (cheap, readily available)

Genuine PURALATOR quality PCV valve suit 1/2 and 3/4 grommet universial Ford Fal | eBay

Find many great new & used options and get the best deals for Genuine PURALATOR quality PCV valve suit 1/2 and 3/4 grommet universial Ford Fal at the best online prices at eBay!

www.ebay.com.au

its a controlled vacuum leak, so you will need to make sure any restrictor that is required is fitted (ie: a narrowed bit of line)

 

[crompo]

Thanks for the advice and the lead to a suitable PCV Valve.
Next week is already spoken for, committed to non shed tasks but the following week I will get back into the shed.