READ THE MANUAL!
Then Fit a locating dowel through the block access plug hole into the notch in the crankshaft.
You can feel it going in.
Remove the plugs out of the back end of both camshafts .
Make up an aligning tool to line up the two camshaft end grooves.
FORGET ANYTHING TO DO WITH FUEGOS ETC!
Sorry, but we need to be blunt...
Then Fit a locating dowel through the block access plug hole into the notch in the crankshaft.
You can feel it going in.
Remove the plugs out of the back end of both camshafts .
Make up an aligning tool to line up the two camshaft end grooves.
FORGET ANYTHING TO DO WITH FUEGOS ETC!
Sorry, but we need to be blunt...