604 Electronic Dissy

Pug_405_Mi16

Pug_405_Mi16

Well-known member
1000+ Posts
Fellow Frogger
Joined
Oct 25, 2001
Messages
1,504
Location
Hobart
Hi,

I am after some advise on the 604...

I have a Volvo dissy to go in it, does anyone have a wiring diagram so I can wire it up into the 604 ??

Any help would be great

Cheers

Ben
 
as soon as i get around to fixing the doors on the 604 so i can open them up again i'll draw up the diagram
some #^$hole decided they wanted to try and get into the car to steal the battery out of it but instead stuffed the lock
and seeing as i haven't put the grille back into the GTi-6 yet the same decided they might try and take my battery untill something spooked them
i went to start the car this morning and nothing lit up
i thought that's weird
popped the bonnet and the battery cover was sitting in front of the car and the positive terminal was off the battery
have no fear though as i know the culprits and have since been dealt with in true pugrambo style :D
 
They are sure about !

They have some need to try and steal my sisters 504 TI at the mo.....who knows why it's not a Commondore with wide wheels!

Anyhow thanks Sean....I look foward to finding out! I have been told that the elextronic dissy will make the 604 a much better car!

Cheers

Ben
 
pugrambo:
as soon as i get around to fixing the doors on the 604 so i can open them up again i'll draw up the diagram
some #^$hole decided they wanted to try and get into the car to steal the battery out of it but instead stuffed the lock
and seeing as i haven't put the grille back into the GTi-6 yet the same decided they might try and take my battery untill something spooked them
i went to start the car this morning and nothing lit up
i thought that's weird
popped the bonnet and the battery cover was sitting in front of the car and the positive terminal was off the battery
have no fear though as i know the culprits and have since been dealt with in true pugrambo style :D
Click to expand...
Would you be able to send a copy of the wiring down this way too thanks deal

cheers!
 
Ben, my car has the electronic dissy, so if you want to come up and look at it and take some notes you are welcome.
You know where I am.
 
thought i might as well post this in here as well

maybe a how to section could be an addition to A/F with pics and procedures for people

or do we already have one ?

just a thought

click here for some pics

now then
from the volvo control box there are 4 wires you need to worry about
at the end of the wire loom from the box there is a white wire and a brown wire
white wire goes to negative side of the coil
brown wire goes the positive side of the coil

not far from the end there are another two wires that come out of the volvo loom from the control box
the blue wire goes to 0.4 side of the ballast resistor
the brown wire goes to the 0.6 side on the ballast resistor
these are both one one side of the ballast resistor
the other side of this you need the yellow wire number 24 from the pug wiring loom

wire number 112 from pug wiring which is green goes to the negative side of the coil and 112A is blanked off also the bigger blue wire that comes out of the loom next to 112A is blanked off as well

you should have a wire from the dissy that has a plug on the end of it with a spring clip on it that one of course plugs into the the other wire from the volvo box

if you need any more help just let me know and i can walk you through the process

now then when you go to put on you electric fuel pumps run the positive wire from the positive side of the coil
that way the pump only runs when you have ignition on
you can run a fuse on there as well to safe guard it if you like
make sure you also put a "T" in the return fuel line with restriction to run any excess fuel back to tank
you can blank the line off if you prefer but i don't do this
if you leave it dangle fuel will run out of it
if you leave it plugged onto the old pump it will pressurize the fuel tank
 
Well the 604 is fixed!

Turned out to be a missing tappet! it had broken in half and was laying around near the OHV Gear

So she is all good now!

Ben
 
You must log in or register to reply here.
Top