407 HDi 2.0 engine mounts

[DoubleChevron]

Hi Guys,

I can see i need the stabilising bar on the top mounts as one of the bushes is gone. Is there any other engine mounts that colapse at the same time as this I should be replacing at the same time (its all hidden, I can't see a damn thing outside in the wet and dark .. ).

seeya
Shane L.

 

[keithm]

I recently replaced the stabiliser and the mount underneath it just recently . They were both easy to replace with no hidden surprises . The mount below had collapsed 25mm . The car is now lovely and quiet .

Keith

 

[DoubleChevron]

I recently replaced the stabiliser and the mount underneath it just recently . They were both easy to replace with no hidden surprises . The mount below had collapsed 25mm . The car is now lovely and quiet .

Keith

oh collapsed..... i thought it looked ok and untorn. but collapsed is entirely possible. Thanks!

 

[keithm]

The old mount on mine looked fine but measured 70mm from the bottom of the flange to the top of the mount . The new one was 95mm . I would replace both then you know you won't have any issues