Hi Peugeot Forum team,
Let me introduce myself I am Nav. I have an IT background and like to repair and fix issues as that is what I do as an IT Support Analyst. I also like to get my hands dirty fixing car issues. I learn't the basics from my dad, who has had Alzheimer's for many years now.
I bought a Peugeot 308cc 2009 a few months ago and carried out the following:
1) Timing chain replacement
2) Roof repair ( parcel shelf replacement)
3) Full service.
The car struggled to change from 1st gear to 2nd and caused a slight delay with high revs this was happening since the car was bought other gear changes were very smooth and life carried on.
The car now has an issue with the AL4 Automatic Gearbox. When engaging Gear (D-drive) the car does not move at all and in reverse R it is fine I have the following codes using Lexia 3 PSA Diagbox Software.
P0721 Vehicle Speed data fault (Gearbox section of diabox)
U0404 Gear information fault (Engine section of diagbox)
P0565 Cruise control signal fault (Engine section of diagbox)
I understand that codes may be related.
Work done is change of speed sensor Number 8 in the diagram
I dont have the other sensor number 7 as there is a blanking plate.
Does any one know what should be done to resolve the issue? Your help is greatly appreciated.
Let me introduce myself I am Nav. I have an IT background and like to repair and fix issues as that is what I do as an IT Support Analyst. I also like to get my hands dirty fixing car issues. I learn't the basics from my dad, who has had Alzheimer's for many years now.
I bought a Peugeot 308cc 2009 a few months ago and carried out the following:
1) Timing chain replacement
2) Roof repair ( parcel shelf replacement)
3) Full service.
The car struggled to change from 1st gear to 2nd and caused a slight delay with high revs this was happening since the car was bought other gear changes were very smooth and life carried on.
The car now has an issue with the AL4 Automatic Gearbox. When engaging Gear (D-drive) the car does not move at all and in reverse R it is fine I have the following codes using Lexia 3 PSA Diagbox Software.
P0721 Vehicle Speed data fault (Gearbox section of diabox)
U0404 Gear information fault (Engine section of diagbox)
P0565 Cruise control signal fault (Engine section of diagbox)
I understand that codes may be related.
Work done is change of speed sensor Number 8 in the diagram
I dont have the other sensor number 7 as there is a blanking plate.
Does any one know what should be done to resolve the issue? Your help is greatly appreciated.