Hi everyone, We've got a bit of an issue with our 206.
The engine had low compression, so swapped in a "new" engine, and she now starts and runs great again.
I also changed over the AL4 gearbox over to the new engine. I did drain a bit of oil from the gearbox, and refilled with that same oil after refitting. Because I did spill a a bit here and there I added about 300cc of general atf oil. The first few miles were totally problem free.
However, when pushing the go-pedal down quite hard (I guess the box would downshift 1 gear), it suddenly lost all drive, and we coasted to a stop. We can hear a buzzing sound when shifting to drive or reverse, but we're not getting any movement. No errors or lights on the dash, and don't have access to pp2000 (yet).
Any idea where I should start troubleshooting this? Disconnecting the 12V didn't help
The engine had low compression, so swapped in a "new" engine, and she now starts and runs great again.
I also changed over the AL4 gearbox over to the new engine. I did drain a bit of oil from the gearbox, and refilled with that same oil after refitting. Because I did spill a a bit here and there I added about 300cc of general atf oil. The first few miles were totally problem free.
However, when pushing the go-pedal down quite hard (I guess the box would downshift 1 gear), it suddenly lost all drive, and we coasted to a stop. We can hear a buzzing sound when shifting to drive or reverse, but we're not getting any movement. No errors or lights on the dash, and don't have access to pp2000 (yet).
Any idea where I should start troubleshooting this? Disconnecting the 12V didn't help