The drivers seat in my BX has sagged a little but the passenger seat is fine. Just prior to one of my Adelaide trips I tried to swap the seats over. The mounts are symetrical but the seatbelt anchors are attached to the seats making a straight swap less than straightforward. It was stinking hot so I just bolted the drivers seat back in to revisit it later.
Which is best/easiest/possible – swap the whole seats over and relocate the anchors or swap the cushions between the frames?
Regards,
Trevor
Which is best/easiest/possible – swap the whole seats over and relocate the anchors or swap the cushions between the frames?
Regards,
Trevor