Cheers Pugwash, not that as the flywheel was left in place. UFO picked it, disconnected earth that I thought was dealt with.
Swapped 306 gearbox - now won't start
- Thread starter Ginch
- Start date
Thanks Erik! They are not adjustable, and I measured them just to be sure. They would seem to be the correct length.
Do you have both of the short linkages connected?
Also, I can't remember which linkages were hanging off that gearbox when you took it.
The 306 linkages should be 260.5mm for the long one, and 106mm for the short ones.
The 405 linkages would be 246mm for the long one, and 101.5mm for the short ones.
You will need to use the 306 linkages, regardless of the origin of the gearbox.
The 306 linkages should be 260.5mm for the long one, and 106mm for the short ones.
The 405 linkages would be 246mm for the long one, and 101.5mm for the short ones.
You will need to use the 306 linkages, regardless of the origin of the gearbox.
The linkages that were on it were different than what was on my car, so I swapped them all over, including the lever and bracket as in this pic.
Thank you for the acknowledgement. 