Replacing 505 driveshaft outer boots

I am leaning towards getting the original boot with the can as getting an expandable boot on requires the air tool with the rods that stretch out the boot, Asked a couple of mechanics already round here and they strip the shaft to do boots, don't have the tool, plus the boots correctly sit inside the can etc. Miht as well do the inner while I'm there too.
 
Be careful with refitting the rear brakes pads after you refit the caliper

the piston needs to be rotated 45 degrees before it can be pushed back. Not doing this will destroy your handbrake mechanism.

remember to rotate piston back
 
Top