Rear Scenic Rear Brake Pads

[RINGER]

Don't have special piston wind off tool, but possibly can make.
Want to complete job over this weekend.
Anyone made anything simple or any suggestions please. JG

 

[pugwash]

not familiar with the renault calipers but if they are like peugeot ones that need inward presure whilst winding them back ,i have used a g clamp and multi grips ,to do the job ,put the threaded part of the g clamp on the piston tighten it up then turn the piston if its not going in try rotating in the oposite direction ,as from memory there is ,different threads left to right hand side of car ,once you have the clamp on you cant turn it the wrong way as it has nowhere to go ,be careful not to damage the piston whith the multies ,as the piston winds in you have to re aply a couple of turns then rotate some more ,i was also in your situation, had to get the job done ,so used what i had to do the job

 

[dimistyle]

These work with some persistent and can be purchased around $20 from most auto stores. Uses your standard 1/2" socket extension to rotate. Has multiple options. Again not sure what Renault pattern required

 

[RINGER]

Disc Brake Piston Caliper Wind Back Tool for Car Rear with Cube Design M5Z0 | eBay

In addition, made from steel, the disc brake piston tool is very sturdy and durable, and you can use it on many universal vehicles with 4 wheels. This cube tool rotates piston back into brake calipers when replacing brake pads on vehicle with rear wheel disc brakes.

www.ebay.com.au

Is this what you mean?
I have one of these.