Peugeot 207 gti 2007 model

AAA

Member
Fellow Frogger
Joined
Nov 5, 2016
Messages
93
Location
Australia
Hi my Peugeot friends,

I’m trying to find where the fuse located for my front fog lights.
I just recently replace my fog light to LED lights and one side not working when I first turn it on and when I turn it on and off few times, that’s when it works. But still warning lights coming up. Can any one help. Than you.

Regards
Tee


Sent from my iPhone using aussiefrogs
 
Are you sure the warning isn't because the LEDs draw less current than the previous design bulbs? The computer can detect an error.
 
If your car is like othet modern PSA cars it doesn't have a fuse for the fog lights - they are controlled by the computer. If you fit a LED bulb that draws a lesser current, the computer sees an error. You can buy LED lamp modules with raised resistance to suit CAN bus vehicles.
 
Yeah, I bet the new lamps are on the cusp of drawing sufficient current to switch the relay setup, so one works only after a few tries.
 
Top