help please 403 gearbox in 203

[tok403]

Hello all
My 203 ute restoration is moving along very well. I have fitted 403 gear box and diff to bolt up to 403 motor. I have installed 403 outer steering column over 203 column to give me the right gear linkage/shift. However what do I do about the clutch surely someone out there has done this conversion. I am contemplating installing 403 pedal assembly it looks with a bit of cutting/modifing the fire wall it could be done (my bro would shutter to think such modification going away from original).
Thanks in advance.

 

[alpine]

clutch

pendant pedal setups in 203s have been done, not sure if they used the 403 pedal assembly,

getting the 403 horizontal clutch shaft to align with the box would be tricky.

Keith Bridge in Nowra has a fast green 203 with pendant pedals not sure what pedal box was used

 

[tok403]

Yes the clutch shaft is were I will start and work up from there.

pendant pedal setups in 203s have been done, not sure if they used the 403 pedal assembly,

getting the 403 horizontal clutch shaft to align with the box would be tricky.

Keith Bridge in Nowra has a fast green 203 with pendant pedals not sure what pedal box was used

 

[unigabe]

Cedric has a 403 box with the 203 pedals. I'll try to photograph the setup today.