Wanted GS Saloon Rear Seat Squab Mounting Brackets x 2

Dave Rogers

Active member
Fellow Frogger
Joined
Nov 4, 2010
Messages
300
Location
Frankston Melbourne Australia
Hi,
The problem with taking over a restoration that somebody else started (three previous owners before I took it on) is that you can't be sure that all bits that have been removed are actually in the boxes that come with the body. I've been very lucky in that a distributor was the only major part missing, all the other missing small ancillary parts I've been able to source elsewhere, until today! All my upholstery has been restored and the interior is coming along well to the extent that I'm about to install the rear seats but I'm missing the two squab mounting brackets as per No. 14 in the attached screenshot. surprisingly though I do have one square blue plastic embellisher that goes on the top of the bracket. What did fall out of the rear squab when it came back from the upholsterer were the two plates as per the attached photo and searching parts diagrams does not shed any light where they should go or what is there function (apart from the obvious of connecting something to another thing).
So 1) has anybody got a couple of spare sub mounting brackets that I could buy? and 2) any ideas on the function/postion of my mystery plates?
Cheers,
Dave
Oh, it's a 1977 GS Pallas 1220.
 

Attachments

  • Screenshot 2025-02-04 at 5.32.36 pm.png
    Screenshot 2025-02-04 at 5.32.36 pm.png
    181.1 KB · Views: 35
  • Raid Cape York 2022 - CCCV - 1.jpeg
    Raid Cape York 2022 - CCCV - 1.jpeg
    165.9 KB · Views: 34
Dave, have you considered posting this in the main Citroen Forum? Someone with what you're after might not peruse the Parts Forum.
 
Top