203/403 DECALS AVAILABLE

James Gelido

James Gelido

Active member
VIP Paid Subscriber
Fellow Frogger
Joined
Jun 16, 2018
Messages
323
Location
Sydney
Hi Everyone,

We have now been sent the prints for the Peugeot Oil Bath/Air Cleaner decals. The decals are transparent and peel off. They are also heat resistant. We got them as close to original as we could. Costing is below:

Smaller 'S.S. LAUTRETTE & CIE' Single - $5

'TECALEMIT' 2 Part Set - $10

Large 'S.A LAUTRETTE & CIE' 2 Part Set: $10

$5 postage.

I have 20 available of each decal. If interested, please DM me what you would like and your mailing address.

Big Thanks to @DeeCee for helping with the process!

Cheers,

James
 

Attachments

  • 345253451_1055052082140931_5973573704235171050_n.jpg
    345253451_1055052082140931_5973573704235171050_n.jpg
    274.4 KB · Views: 80
  • 351473394_487353410231840_6887544344988395053_n.jpg
    351473394_487353410231840_6887544344988395053_n.jpg
    143.2 KB · Views: 83
  • 351628667_1903890593313667_6843428906922529125_n.jpg
    351628667_1903890593313667_6843428906922529125_n.jpg
    152.3 KB · Views: 79
Last edited:
Just placed the 'TecalemiT' decals on my 203 oil bath. They look awesome! I don't have a silencer though, so placed the silencer sticker on the hose to break it up a bit.
 

Attachments

  • 345103536_611625524259447_3727064871551807201_n.jpg
    345103536_611625524259447_3727064871551807201_n.jpg
    232 KB · Views: 82
  • 351092840_937622464160031_2653081724683702205_n.jpg
    351092840_937622464160031_2653081724683702205_n.jpg
    263.4 KB · Views: 87
  • 351152723_255223100436427_1705533125548134278_n.jpg
    351152723_255223100436427_1705533125548134278_n.jpg
    162.8 KB · Views: 82
My 203 has the carby on the right side of the motor, (have a twin carby manifold which will fit he left side. not used) I will need to have another look at the parts book and check. My motor is original as the engine and chassis numbers are the same.
 
Jeffd said:
My 203 has the carby on the right side of the motor, (have a twin carby manifold which will fit he left side. not used) I will need to have another look at the parts book and check. My motor is original as the engine and chassis numbers are the same.
Click to expand...
Do you intend fitting the twin carb manifold? If not I would be very interested in purchasing it from you. Do you know what make it is ?
Regards
Mike
 
You must log in or register to reply here.
Top