1989 505SR series 2 electrical help

joe5050

New member
Tadpole
Joined
Feb 11, 2019
Messages
1
Location
Malaysia
Dear fellow enthusiasts,

Greetings from Malaysia, i'm new here and i would greatly appreciate some help in getting my 505SR back to what it was. Here's the thing, part of the wiring in the engine bay was cannibalized. I have managed to get the engine started, but there's a bunch of wires, specifically 2 thick white wires which i cant figure out where its connected. I'm guessing its +12V and from the haynes manual it shows two wires which are connected to the direct +12V feed on the starter motor. Can anyone confirm this. next are a bunch of thin multi colored wires which i cant figure out where its connected. i'm also missing the socket for the radiator coolant level sensor and i have no idea what colour are those wires and where they run. My car is a RHD model.

Best Regards,
Joe
 

Attachments

  • 20190507_182515.jpg
    20190507_182515.jpg
    74.8 KB · Views: 162
  • 20190507_182523.jpg
    20190507_182523.jpg
    61.9 KB · Views: 127
Top