Hi. My first Peugeot - a Red 307CC, manual. It will be great to get to drive it! Rescued it from being scrapped as body and interior in excellent condition. But purchased it knowing an engine top end rebuild was required due to previous owner thinking timing belts lasted forever! Only 2 bent inlet valves, so it could have been much worse. I am having a great challenge finding all the required parts for a full head rebuild, mostly due to difference between EWJ104 and EWJ104S engine, the latter with higher output goodies. Finally have correct valves and head bolts - missing in action are the correct hydraulic lifters - these are NOT the same as the standard EW10J4 (larger diameter in S engine). Best information I can find is they are possibly from a 2.2ltr engine - is this correct? Any suggestions as to where in Aus I might find a new set of the correct lifters? The guys rebuilding the head are cursing me - 2 sets of lifters supplied so far and both wrong size! I don't really want to put re-surfaced original lifters back in as I have no idea if they are all serviceable. Any assistance greatly appreciated. Thanks