Great work. As always. fantastic progress.
Yes, saw that. With the double angle bracket I was given I will be able to move the bolt hole just that little bit further out so that the hole (and therefore the nut) is between the outer closing panel and the outer sill panel that I can access from underneath. Your spot is between the inner and outer sill plates, difficult to access. Will play with it and take some photos.Hello, did you see the picture I posted of the front seat belt mounting on the sill? It isn't where you have marked.
Not so sure Tim. Dirt from the 70s had flares and long collars...and I found a note in the dirt: “placed here by Tim C through reckless driving”I did NOT put that red dirt in there It looks like it accumulated in the 70s.
Tim