205 DKZ head?
  • Register
  • Help
Results 1 to 10 of 10

Thread: 205 DKZ head?

  1. #1
    1000+ Posts schlitzaugen's Avatar
    Join Date
    Nov 2010
    Location
    loneliness capital of the world
    Posts
    8,999

    Default 205 DKZ head?

    Can anyone tell by the picture in this auction if the head is a DKZ or not?

    http://cgi.ebay.co.uk/peugeot-205-1-...item19c3d80793

    Advertisement


    I am looking to buy.
    ACHTUNG ALLES LOOKENPEEPERS

    Das computermachine is nicht fur gefingerpoken und mittengrabben. Ist easy schnappen der springenwerk, blowenfusen und poppencorken mit spitssparken. Ist nicht fur gewerken bei das dummkopfen. Das rubbernecken sightseeren keepen hands in das pockets-relaxen und watch das blinkenlights.

  2. #2
    1000+ Posts djvu205's Avatar
    Join Date
    Nov 2010
    Location
    3550
    Posts
    1,402

    Default dkz

    i would say yes. there are plenty of those in oz. where are you located?

  3. #3
    Fellow Frogger! DjB8V's Avatar
    Join Date
    Nov 2010
    Location
    8V'ville
    Posts
    919

    Default

    Don't forget that you can use either a series 3 205gti head or a 205 Si head. They only difference is the cam. There are a few other cars you can get them from too, one of the Citroen BX models uses a XU9JAZ (DKZ) motor too. One of the 405 (Sri maybe???) uses this motor too.

    Buy local.


    Chris

  4. #4
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,258

    Default

    Quote Originally Posted by schlitzaugen View Post
    Can anyone tell by the picture in this auction if the head is a DKZ or not?

    http://cgi.ebay.co.uk/peugeot-205-1-...item19c3d80793

    I am looking to buy.
    You don't want mine now then? I got it off the engine yesterday so I could throw the bottom end away, I will pick up your block early next week.
    Graham

  5. #5
    1000+ Posts Andrew Ch's Avatar
    Join Date
    Nov 2010
    Location
    Melbourne Australia
    Posts
    1,382

    Default

    In the description there are conditions that state " no overseas postage " in case you hadn't noticed : )

  6. #6
    1000+ Posts schlitzaugen's Avatar
    Join Date
    Nov 2010
    Location
    loneliness capital of the world
    Posts
    8,999

    Default

    Quote Originally Posted by GRAHAM WALLIS View Post
    You don't want mine now then? I got it off the engine yesterday so I could throw the bottom end away, I will pick up your block early next week.
    Graham

    I thought you didn't want to sell it to me after not answering my messages.

    Of course I want it and the block.
    Don't throw the bottom end away just yet either. I am going to open my cracked engine and if the crank is no good I might pinch yours. There are other ancillaries I might want too, such as the water sender housing, and who knows what else.

    Let me know what I need to do to get this stuff off you, please.

    Thank you everybody.

    I don't really know where to look for pug bits yet. It will come to me in time. I hope.
    ACHTUNG ALLES LOOKENPEEPERS

    Das computermachine is nicht fur gefingerpoken und mittengrabben. Ist easy schnappen der springenwerk, blowenfusen und poppencorken mit spitssparken. Ist nicht fur gewerken bei das dummkopfen. Das rubbernecken sightseeren keepen hands in das pockets-relaxen und watch das blinkenlights.

  7. #7
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,258

    Default

    Quote Originally Posted by schlitzaugen View Post
    I thought you didn't want to sell it to me after not answering my messages.

    Of course I want it and the block.
    Don't throw the bottom end away just yet either. I am going to open my cracked engine and if the crank is no good I might pinch yours. There are other ancillaries I might want too, such as the water sender housing, and who knows what else.

    Let me know what I need to do to get this stuff off you, please.

    Thank you everybody.

    I don't really know where to look for pug bits yet. It will come to me in time. I hope.
    I've sent 3 or 4 answers so far
    I have the head off the other motor but the motor will be scrapped as it is a worn out Si 1.6 and has a seized head bolt, had to grind the bolt head off to remove the cylinder head.
    Let you know if Aus Post will send the good block after I pick it up next week.
    Graham

  8. #8
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,258

    Default

    Quote Originally Posted by schlitzaugen View Post
    I thought you didn't want to sell it to me after not answering my messages.

    Of course I want it and the block.
    Don't throw the bottom end away just yet either. I am going to open my cracked engine and if the crank is no good I might pinch yours. There are other ancillaries I might want too, such as the water sender housing, and who knows what else.

    Let me know what I need to do to get this stuff off you, please.

    Thank you everybody.

    I don't really know where to look for pug bits yet. It will come to me in time. I hope.
    I've sent 3 or 4 answers so far
    I have the head off the other motor but the motor will be scrapped it is a worn out Si 1.6.
    Let you know if Aus Post will send the block after I pick it up next week.
    Graham

    I also have a complete bottom end for a DFz, block, pistons crank etc, if you want it for $100.
    It would need to be put on a pallet and shipped though.
    Graham

  9. #9
    1000+ Posts schlitzaugen's Avatar
    Join Date
    Nov 2010
    Location
    loneliness capital of the world
    Posts
    8,999

    Default

    there's something wrong then.

    Where did you send the messages?

    tried to PM me?

    I have received absolutely nothing.

    Please try again to send me a PM to see if I get it, and I'll answer and give you my direct email address.
    ACHTUNG ALLES LOOKENPEEPERS

    Das computermachine is nicht fur gefingerpoken und mittengrabben. Ist easy schnappen der springenwerk, blowenfusen und poppencorken mit spitssparken. Ist nicht fur gewerken bei das dummkopfen. Das rubbernecken sightseeren keepen hands in das pockets-relaxen und watch das blinkenlights.

  10. #10
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,258

    Default

    Quote Originally Posted by schlitzaugen View Post
    there's something wrong then.

    Where did you send the messages?

    tried to PM me?

    I have received absolutely nothing.

    Please try again to send me a PM to see if I get it, and I'll answer and give you my direct email address.
    Sent one to your direct email.
    Graham

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •