505GTi alloy wheels
  • Register
  • Help
Results 1 to 7 of 7
  1. #1
    Member GTIrally's Avatar
    Join Date
    Sep 2003
    Location
    Adelaide
    Posts
    66

    505GTi alloy wheels

    Does anyone know anyone who has non standard alloys on a 505 gti. Because ive spoken to people down here in adelaide and the general consensus is that due to the wierd stud pattern and offset that i cannot buy alloys for it.
    Or if anyone knows of a "brand" of alloy wheel that make the size im looking for.

    Advertisement


    cheers
    long live the pug!!!!

    Ahh 'Peugeot', the drivers car! Why drive anything less!!!!!!!!!!!

  2. #2
    Guru davemcbean's Avatar
    Join Date
    Apr 2001
    Location
    Camden NSW & Selwyn NZ
    Posts
    2,334
    The Australian company Performance wheels make a 15x6" alloy wheel to suit the 504/604/505 for about $200-$220 each. Check them out at:

    <a href="http://www.performancewheels.com.au/super_lite_wheels.htm" target="_blank">http://www.performancewheels.com.au/super_lite_wheels.htm</a>

    If your car is a sedan, you will need to grind a small amount off the rear calipers to clear the wheels.

    Dave
    NZ Fleet
    1976 504 Ti
    1984 205 GT twin carb
    1991 205 SI 1.6GTI motor
    1994 106 Xsi
    1996 Mondeo V6
    Aus Fleet
    1955 203C
    1997 Civic Cxi (great allrounder- revy, flexible, nimble, comfortable , economical, simple and durable )

  3. #3
    Guru davemcbean's Avatar
    Join Date
    Apr 2001
    Location
    Camden NSW & Selwyn NZ
    Posts
    2,334
    You can see a variety of other second hand wheels which fit the 505 on my website:

    <a href="http://www.geocities.com/davemcbean/wheeltypes.html" target="_blank">http://www.geocities.com/davemcbean/wheeltypes.html</a>
    NZ Fleet
    1976 504 Ti
    1984 205 GT twin carb
    1991 205 SI 1.6GTI motor
    1994 106 Xsi
    1996 Mondeo V6
    Aus Fleet
    1955 203C
    1997 Civic Cxi (great allrounder- revy, flexible, nimble, comfortable , economical, simple and durable )

  4. #4
    1000+ Posts cruiserman's Avatar
    Join Date
    Aug 2002
    Location
    Canberra
    Posts
    1,290
    I have 15 x 6 superlites as mentioned above.
    Neil
    '94 405 SRBT

    '82 CX 2400 Pallas 5spd

    '77 CX 2400 Pallas 4spd manual Import

    '76 CX Super

    '05 WL Statesman

    '92 HZJ80 Landcruiser

  5. #5
    Member GTIrally's Avatar
    Join Date
    Sep 2003
    Location
    Adelaide
    Posts
    66
    who knows the offset and PCD for a series 2 505 GTI???
    cheers

    Ahh 'Peugeot', the drivers car! Why drive anything less!!!!!!!!!!!

  6. #6
    Guru davemcbean's Avatar
    Join Date
    Apr 2001
    Location
    Camden NSW & Selwyn NZ
    Posts
    2,334
    GTIrally:
    who knows the offset and PCD for a series 2 505 GTI???
    cheers
    Should be the same as series 1 GTI:

    140mm PCD

    25mm offset

    Dave
    NZ Fleet
    1976 504 Ti
    1984 205 GT twin carb
    1991 205 SI 1.6GTI motor
    1994 106 Xsi
    1996 Mondeo V6
    Aus Fleet
    1955 203C
    1997 Civic Cxi (great allrounder- revy, flexible, nimble, comfortable , economical, simple and durable )

  7. #7
    Fellow Frogger! BigH's Avatar
    Join Date
    Oct 2002
    Location
    Melbourne
    Posts
    206
    I have 15x6 superlites on my 404 wagon and I was told that they had a few mill. extra offset over the standard wheel. Hank.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •