604 register - Page 4
  • Register
  • Help
Page 4 of 9 First 12345678 ... Last
Results 76 to 100 of 207

Thread: 604 register

  1. #76
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default another thing

    First, Thanks to Ray Bell for his answer.

    Here in Israel there was only one 505 GTi / STi that came with alloy wheels.
    This car was of the marketing director of the Peugeot agency but it was sold and then stolen, The car was seen in Gaza few weeks ago (on the TV).
    All 505 / 504 / 604 models came with steel wheels and plastic covers.

    Advertisement


    1. Is there a possibilty to find in AU alloy wheels? I would preffer the original
    by Peugeot and not just alloy wheels.
    2. Is there a possibility to find the plastic wheel covers as they where on the
    1979 model of the 604?
    3. Rear A/C - where can I find the unit?

    Thanks again,

    Amir

  2. #77
    1000+ Posts edgedweller's Avatar
    Join Date
    Jul 2004
    Location
    GEORGETOWN SA
    Posts
    2,117

    Default Interesting dilema

    It had to happen, some fellow from the middle-east wants to join the register.

    Poor Mr Pugrambo, which way to turn, good aussie, open, trusting or hardbitten realist of the 21st century?

    Perhaps, to date, the Israelies have not been considered in the same light as the Islamists who pirate our 504s, perhaps they are just more sophisticated and plan ahead? Is this the thin edge of the wedgie that will see good, Aussie back yard tinkerers flumoxed and at the end of their RWD options.

    OMG

    Pugrambo, please consign all register details to unbreakable code, lest the end be nigh!

    Good luck in the making of this most executive of executive decisions.
    It's tough at the top.

    Cheers ed ge

    Ps. if you consider it necessary to make a pre-emptive strike, Warwick is apparently available for wet work.

  3. #78
    Budding Architect ???? pugrambo's Avatar
    Join Date
    Jul 2000
    Location
    Parkes - N.S.W - Australia - Earth
    Posts
    12,258

    Default

    Quote Originally Posted by amirski
    Yes, I would like to have the 14" studs.
    On top of the wiring diagram, I have some pages that I got from the US
    for the 604 and 505 with detaied explenations of each part of the car that can be very usefull.
    I do not have a scanner so if you give me your postal address I'll make a copy
    and send it over, if you can put it on the web for others 604/505 owners it will be graet. (also I have parts list with serial numbers - but as this is from the US I do not know if this will be like the EU or AU numbers).

    Other question:
    I need a steering wheel for the 1982 model (4bars) in light brown color, do you know where I can buy such?

    I would like also to register my cars.

    Thanks,

    Amir Fogel

    i'll PM my address to you and i'll put the diagrams up for people to see and use

    as for a steering wheel i'll see what i can find for you

    we only got the 4 spoke wheels in this country and 99% of them were brown
    3 x '78 604 SL

    1 x '98 306 GTi6

    1 x secret project

    1 x '98 406 STDT troop carrier and i don't care if it stinks, i don't sniff it's arse Death by wank tank

    1 x '99 406SV 5spd wagon, time to burn more fuel

    1 x 1994 605 SV3.0


    WTD long range fuel tank for 605

  4. #79
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default Thanks

    I'll photocopy all the pages I have and send it.
    I hope people will benefit from that.

    Thanks again,

    Amir

  5. #80
    Gone Fishin' Ray Bell's Avatar
    Join Date
    Jun 2001
    Location
    Burpengary and Murrumburrah, Qld and NSW
    Posts
    9,226

    Default

    I have an abundance of the plastic wheel trims.

    As for the alloy wheels, they are in big demand here, you'd be lucky to get them from us.

    On the other hand, they are somewhat plentiful in Canada. The Peugeot-L forum often has mention of cars in junkyards with them on. If you're going to be shipping something half way round the world, you might as well get them from there.

    Not trying to be smart, but like I said, they are in such demand here that some have considered getting them from the US and Canada anyway.

  6. #81
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default Hi Ray

    Thanks for the info.
    Are the wheel cup that you have is like the 1979 model?
    Will they fit my '77 model and the '82?
    If I would like to buy from you 8 pieaces - what will be the price
    including shipping and how can I pay you.

    Thnkas,
    Amir

  7. #82
    Budding Architect ???? pugrambo's Avatar
    Join Date
    Jul 2000
    Location
    Parkes - N.S.W - Australia - Earth
    Posts
    12,258

    Default

    when you fit the wheel covers make sure you do it the right way so as not to break them

    the correct method is to put the wheel on normally and tighten the nuts then fit the covers on over the top

    there are spring clips in the covers that spring over the flange on the nuts

    if you put the covers on then the nuts and then tighten them up you will break the covers and the nuts won't seat correctly on the wheels

    i have seen way too many of these covers broken by people that have done this wrongly

    even though peugeot put out a bulletin on how to fit the wheel covers people still refused to do it the peugeot way in this country and thought they knew better and as a result covers broke and were thrown away
    3 x '78 604 SL

    1 x '98 306 GTi6

    1 x secret project

    1 x '98 406 STDT troop carrier and i don't care if it stinks, i don't sniff it's arse Death by wank tank

    1 x '99 406SV 5spd wagon, time to burn more fuel

    1 x 1994 605 SV3.0


    WTD long range fuel tank for 605

  8. #83
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default Thanks for the info

    Thanks for the info of the wheel covers.

    I have sent you a PM.

    Amir

  9. #84
    Gone Fishin' Ray Bell's Avatar
    Join Date
    Jun 2001
    Location
    Burpengary and Murrumburrah, Qld and NSW
    Posts
    9,226

    Default

    Give me a day or so to check them out. I'll get back to you soon as I can.

  10. #85
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default Hi Ray and Rambo

    Thanks
    1. Ray, I hope you'll find.
    2. Rambo, Thanks for the address, I am photocopying them now
    and I'll airmail them.

    Wish you all a great day.

    Amir

  11. #86
    Gone Fishin' Ray Bell's Avatar
    Join Date
    Jun 2001
    Location
    Burpengary and Murrumburrah, Qld and NSW
    Posts
    9,226

    Default

    So far I have found four... none cracked but one peeling... three centres dented.

    All the clips are intact. There are more somewhere...

  12. #87
    1000+ Posts Wildebeest's Avatar
    Join Date
    Oct 2004
    Location
    Perth Western Australia
    Posts
    2,489

    Default 604 register.

    Quote Originally Posted by pugrambo
    when you fit the wheel covers make sure you do it the right way so as not to break them

    the correct method is to put the wheel on normally and tighten the nuts then fit the covers on over the top

    there are spring clips in the covers that spring over the flange on the nuts

    if you put the covers on then the nuts and then tighten them up you will break the covers and the nuts won't seat correctly on the wheels

    i have seen way too many of these covers broken by people that have done this wrongly

    even though peugeot put out a bulletin on how to fit the wheel covers people still refused to do it the peugeot way in this country and thought they knew better and as a result covers broke and were thrown away
    Why should 604 owners have to read a bulletin or a manual to simply replace a bloody hub cap?
    It's not the fault of the owner " knowing better" its the smart a#@*ed so called engineers over complicating peoples lives.
    A full width hub cap should be designed so that even the position of the valve is irrelevent.

    On a lighter note, how many Renault 12 owners do you know who have tried to "undo" the dummy hubcap nuts?

  13. #88
    Budding Architect ???? pugrambo's Avatar
    Join Date
    Jul 2000
    Location
    Parkes - N.S.W - Australia - Earth
    Posts
    12,258

    Default

    Quote Originally Posted by Wildebeest
    Why should 604 owners have to read a bulletin or a manual to simply replace a bloody hub cap?
    It's not the fault of the owner " knowing better" its the smart a#@*ed so called engineers over complicating peoples lives.
    A full width hub cap should be designed so that even the position of the valve is irrelevent.

    On a lighter note, how many Renault 12 owners do you know who have tried to "undo" the dummy hubcap nuts?

    ah yes but i have seen so called mechanics in pug workshops stuff these things up

    just goes to show how often they read anything more than the latest copy of picture magazine while sitting in parliament
    3 x '78 604 SL

    1 x '98 306 GTi6

    1 x secret project

    1 x '98 406 STDT troop carrier and i don't care if it stinks, i don't sniff it's arse Death by wank tank

    1 x '99 406SV 5spd wagon, time to burn more fuel

    1 x 1994 605 SV3.0


    WTD long range fuel tank for 605

  14. #89
    Fellow Frogger! young 4 old pug's Avatar
    Join Date
    Jan 2005
    Location
    Melbourne NSW
    Posts
    811

    Default

    hey im kenny and im new around here.

    Im thinking of getting a 604 automatic wreck (it was a good car until a bloke moved it with a forklift and buggered up the roof).
    Not sure what model, but its got a v6 carby and auto box.
    Hope to get it soon and will be pulling it apart for spares.
    Anyone interested, give me a buzz.

    [email protected]

    ps its got a sunnroof to.....but its shaped a bit like a tent (forklift...)




    84 505 gti
    85 505 gti
    98 306 xt

  15. #90
    Gone Fishin' Ray Bell's Avatar
    Join Date
    Jun 2001
    Location
    Burpengary and Murrumburrah, Qld and NSW
    Posts
    9,226

    Default

    That's the standard one that sold in Australia...

    Only questions are what wheels, what shape filler cap cover?

  16. #91
    Budding Architect ???? pugrambo's Avatar
    Join Date
    Jul 2000
    Location
    Parkes - N.S.W - Australia - Earth
    Posts
    12,258

    Default

    sounds like the one at bordertown wreckers

    as far as i have been told the roof was damaged by a tree

    the car should be green

    if i had the time i would have already been down there to bring it back home

    as far as i know it has gas on it

    if it doesn't have gas then i would be interested in the carb if it is a weber and maybe the manifold but i would need to see a pic of the manifold first
    3 x '78 604 SL

    1 x '98 306 GTi6

    1 x secret project

    1 x '98 406 STDT troop carrier and i don't care if it stinks, i don't sniff it's arse Death by wank tank

    1 x '99 406SV 5spd wagon, time to burn more fuel

    1 x 1994 605 SV3.0


    WTD long range fuel tank for 605

  17. #92
    Budding Architect ???? pugrambo's Avatar
    Join Date
    Jul 2000
    Location
    Parkes - N.S.W - Australia - Earth
    Posts
    12,258

    Default

    Quote Originally Posted by Ray Bell
    That's the standard one that sold in Australia...

    Only questions are what wheels, what shape filler cap cover?

    from memory if it is the same car i ma thinking of it will have or did have the 604 steel wheels on it and it had a square cap making it a series 2
    3 x '78 604 SL

    1 x '98 306 GTi6

    1 x secret project

    1 x '98 406 STDT troop carrier and i don't care if it stinks, i don't sniff it's arse Death by wank tank

    1 x '99 406SV 5spd wagon, time to burn more fuel

    1 x 1994 605 SV3.0


    WTD long range fuel tank for 605

  18. #93
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default Good Morning

    Hi Rambo,

    I have just sent the envelope to you.
    It should take 7 to 10 days to arrive.

    Amir

  19. #94
    Budding Architect ???? pugrambo's Avatar
    Join Date
    Jul 2000
    Location
    Parkes - N.S.W - Australia - Earth
    Posts
    12,258

    Default

    thank you for that

    as soon as it arrives i'll scan and set it all up on my web page for people
    3 x '78 604 SL

    1 x '98 306 GTi6

    1 x secret project

    1 x '98 406 STDT troop carrier and i don't care if it stinks, i don't sniff it's arse Death by wank tank

    1 x '99 406SV 5spd wagon, time to burn more fuel

    1 x 1994 605 SV3.0


    WTD long range fuel tank for 605

  20. #95
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default Hello to you all

    Rambo, did the envelope arrived?

    Ray, any news regarding the wheel covers?
    Can I please get a picture?

    Thanks,

    Amir

  21. #96
    Budding Architect ???? pugrambo's Avatar
    Join Date
    Jul 2000
    Location
    Parkes - N.S.W - Australia - Earth
    Posts
    12,258

    Default

    not yet but i would say it will be here this week

    then the job of scanning will start
    3 x '78 604 SL

    1 x '98 306 GTi6

    1 x secret project

    1 x '98 406 STDT troop carrier and i don't care if it stinks, i don't sniff it's arse Death by wank tank

    1 x '99 406SV 5spd wagon, time to burn more fuel

    1 x 1994 605 SV3.0


    WTD long range fuel tank for 605

  22. #97
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default Hi Rambo

    Hi,

    Any news with the envelope?


    Amir

  23. #98
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default 604 Alloy Wheels

    Hello,

    I have someone from France that have 4 alloy wheels
    with the tyres (TRX milimetric) and he want to sell them.

    I have check, here in Israel no one has such tyers and I can only get them
    if I buy them in France which is a problem due to the high tax that we pay here. 145% + 17% VAT and this is on the price that the Israeli customes give as it is not regulary imported to Israel.

    If anyone intrested, please let me know.

    Wish you all a great day.

    Amir

  24. #99
    Tadpole amirski's Avatar
    Join Date
    Jan 2005
    Location
    Tel Aviv - Israel
    Posts
    16

    Default Ops, I forgot

    Here are the picture of the wheels.

    Amir
    Attached Thumbnails Attached Thumbnails 604 register-604-alloy-wheels.jpg  

  25. #100
    Budding Architect ???? pugrambo's Avatar
    Join Date
    Jul 2000
    Location
    Parkes - N.S.W - Australia - Earth
    Posts
    12,258

    Default

    Quote Originally Posted by amirski
    Hi,

    Any news with the envelope?


    Amir

    it has arrived

    thank you

    i am in the process of scanning everything and then will be placing it up on my site

    i am also interested in photos of people 604's as well to place on there if you guys are interested in having them there
    3 x '78 604 SL

    1 x '98 306 GTi6

    1 x secret project

    1 x '98 406 STDT troop carrier and i don't care if it stinks, i don't sniff it's arse Death by wank tank

    1 x '99 406SV 5spd wagon, time to burn more fuel

    1 x 1994 605 SV3.0


    WTD long range fuel tank for 605

Page 4 of 9 First 12345678 ... Last

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •