Pug Dealers?
  • Register
  • Help
Results 1 to 12 of 12

Thread: Pug Dealers?

  1. #1
    Tadpole
    Join Date
    Sep 2003
    Location
    Sydney
    Posts
    3

    Pug Dealers?

    Just wanted to ask some people in the know, where some good Peugeot dealers are located in the Sydney area?

    I'll be starting a new job shortly and will be looking to upgrade to a 306... Just want to get in some research and see how much $$$ im up for when I'm ready to make the purchase.

    Thanks guys!

    Advertisement

  2. #2
    Fellow Frogger!
    Join Date
    Feb 2003
    Location
    Sydney
    Posts
    253
    The dealer at Paul Vassallo's from what I've heard is quite good. His cars do seem to be in good nic. Also, theres a GTi6 for $19k that Paul said is very good and you could knock off some $$ of that I'd reckon.

  3. #3
    Budding Architect ???? pugrambo's Avatar
    Join Date
    Jul 2000
    Location
    Parkes - N.S.W - Australia - Earth
    Posts
    12,266
    Kristian:
    The dealer at Paul Vassallo's from what I've heard is quite good. His cars do seem to be in good nic. Also, theres a GTi6 for $19k that Paul said is very good and you could knock off some $$ of that I'd reckon.
    Damon Beck has been around for many years
    from what i have gathered he is very honest
    we actually bought the last 604 made in this country (which is the car that warren gordon had not so long ago and andrew from bribbaree has the twin to which we got at the same time) through Damon when he was still at renault australia/JRA in moorebank/liverpool
    3 x '78 604 SL

    1 x 2018 3008

    1 x 2000 Citroen XM,

    1 x '98 306 GTi6 sadly sold

    1 x secret project

    1 x '98 406 STDT troop carrier and i don't care if it stinks, i don't sniff it's arse Death by wank tank

    1 x '99 406SV 5spd wagon, time to burn more fuel

    1 x 1994 605 SV3.0

  4. #4
    1000+ Posts
    Join Date
    May 2001
    Location
    Sydney, NSW, Australia
    Posts
    3,634
    Yes, Damon Beck at Gladesville Prestige Cars would take my vote for being the best car dealer to deal with. Not only is he very easy to speak to, he's willing to negotiate.

    I bought my 306 XSi from him in March. There were a few little niggles I had with it, and nothing was a problem, and it was all sorted by the time I picked it up a day or two later.

    I think another member, parry, may have bought a 406 Mi16 there today.

    The mechanic out the back there, Paul Vassallo is great too

    Welcome to Aussiefrogs anyway, and if you want to see some of our cars (of which a few will be Damon Beck origin!) come along on our drive day on Sunday... meeting at 9am at McDonalds westbound on the M4 at Eastern Creek. You'll find the info in the "French Car Club Announcements" forum up a little bit above this one. It doesn't matter what sort of car you have now - everyone's welcome!!

    Derek.

    <small>[ 12 September 2003, 05:09 PM: Message edited by: DeKa ]</small>

  5. #5
    Member JohnnoMi16's Avatar
    Join Date
    Mar 2003
    Location
    Chester Hill, Sydney, NSW
    Posts
    98
    Just on this topic of Sydney Peugeot dealers. Would anyone know of a reputable place I could get some badges for my 405?

    I've been to Trivett Classic for some parts, however I didn't like their prices or their service.
    1993 Series 2 405 Mi16 [MII-16V]

  6. #6
    1000+ Posts
    Join Date
    May 2001
    Location
    Sydney, NSW, Australia
    Posts
    3,634
    Auto France at Artarmon: 9439 8145

    Derek

  7. #7
    Member JohnnoMi16's Avatar
    Join Date
    Mar 2003
    Location
    Chester Hill, Sydney, NSW
    Posts
    98
    Nope, he doesn't sell badges at Auto France.
    Any other suggestions of reputable dealerships where I could get badges?
    1993 Series 2 405 Mi16 [MII-16V]

  8. #8
    Member JohnnoMi16's Avatar
    Join Date
    Mar 2003
    Location
    Chester Hill, Sydney, NSW
    Posts
    98
    Anyone?
    1993 Series 2 405 Mi16 [MII-16V]

  9. #9
    XTC
    XTC is offline
    VIC: a fine driving state XTC's Avatar
    Join Date
    Mar 2003
    Location
    Location Location Location
    Posts
    8,566
    JohnnoMi16:
    Anyone?
    Bueller ?
    You're not fooling everyone, or did you forget? .......




    '02 Peugeot 206 GTi / '07 VW Golf GTI
    Now this is a .sig
    AF'd in PER, MEL, SYD, ADL, CBR

  10. #10
    Fellow Frogger! jfn180's Avatar
    Join Date
    Jul 2002
    Location
    sydney
    Posts
    725
    hi johnnomi6 he are a few places to try

    port a pug ph 9556 1500
    ASV at villawood ph 132 750
    Euro car parts at brookvale ph138 800
    Dapco parts ph 9534 5388
    Colliers parts ph 9682 3383

    good luck
    97`black 306 style sold JFN 306
    04 Black 206 GTI 180 JFN 180 FOR SALE
    I HATE V8 LANDCRUISERS


    WEST TIGERS= PREMIERS 05

  11. #11
    Fellow Frogger!
    Join Date
    Sep 2002
    Location
    South West Sydney, NSW
    Posts
    243
    Gladesville Prestige (Damon Beck), always have good stock and quite reasonably priced! Previously owned by Leo Geoghan! I recall Damon have been associated with Peugeot for many years, with him advertising that Peugeot was his passion!

    Auto France, Dapco or Gladesville Prestige first. I have had success with all three. To a lesser extent the Franchised dealers around the place, they tend to be more expensive. I would go to Northshore European before trying any of the others - they seem to have their heads screwed on over there, but again, haven't used them for many years. Mostly because the 406 never needs anything (touch wood)....

    Regards
    Andrew

  12. #12
    Member JohnnoMi16's Avatar
    Join Date
    Mar 2003
    Location
    Chester Hill, Sydney, NSW
    Posts
    98
    I generally get my parts from Dapco or Auto France, however, they don't sell badges. I have been to Trivett Classic for parts before, but I don't like their customer service or prices.

    I'll give the other places a call. Thanks guys!

    John
    1993 Series 2 405 Mi16 [MII-16V]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •