2010 308 Remote key coding
  • Register
  • Help
Results 1 to 4 of 4
  1. #1
    Tadpole spring's Avatar
    Join Date
    Feb 2006
    Location
    Canberra.
    Posts
    14

    Default 2010 308 Remote key coding

    Have successfully had a 'after market' remote key cut and coded to start car - but alas unable to get it to code so the remote door locking etc., works. Any ideas on sequence/process to use?

    Advertisement
    2010 308 Hdi
    1981 505 Sedan
    1989 405 Sedan
    1994 306 S16
    1995 306 XT

  2. #2
    1000+ Posts dmccurtayne's Avatar
    Join Date
    Jul 2013
    Location
    Newcastle/ central coast
    Posts
    2,136

    Default 2010 308 Remote key coding

    Depending on the “output” of the chip you may need to change the remote supplier in the bsi configuration even the new genuine ones are not compatible with some cars.
    To sync the remote you just turn reds on and hold lock for 5 seconds within 10 that’s it then turn ignition off.

    Garage C5 X7 3008 XTE
    Gone but not forgotten 206 GTI 180 306 XR SED 405 MI16 x2 xzara VTS 406 SV 206 XT Berlingo 2011 (best car ever) 306 HDI 307 XSE HDI touring
    Fix it right the first time
    Garage C5 X7 4008
    Gone but not forgotten 3008 206 GTI 180 306 XR SED 405 MI16 x2 xzara VTS 406 SV 206 XT Berlingo 2011 (best car ever) 306 HDI 307 XSE HDI touring
    Fix it right the first time

  3. #3
    Tadpole spring's Avatar
    Join Date
    Feb 2006
    Location
    Canberra.
    Posts
    14

    Default

    DMC thanks will give it a go and advise. Can't get to do 'bsi' config change for a little while though.
    Thanks again.
    2010 308 Hdi
    1981 505 Sedan
    1989 405 Sedan
    1994 306 S16
    1995 306 XT

  4. #4
    Tadpole spring's Avatar
    Join Date
    Feb 2006
    Location
    Canberra.
    Posts
    14

    Default

    No joy with with reset. Will do 'bsi' check when I can get to my Mechanics.
    2010 308 Hdi
    1981 505 Sedan
    1989 405 Sedan
    1994 306 S16
    1995 306 XT

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •