Be3 diff end float
  • Register
  • Help
Results 1 to 3 of 3
  1. #1
    Member shaun1275's Avatar
    Join Date
    Nov 2010
    Location
    Sydney
    Posts
    70

    Default Be3 diff end float

    Hi all, I'm putting a quafe diff in and I noticed that the outer races of the diff carrier bearings have spun slightly. The speedo drive housing is used to clamp the bearings in place and currently it has .011" clearance to do it. My question is is that enough or should I shim it out a bit more?

    Advertisement

  2. #2
    Fellow Frogger!
    Join Date
    May 2005
    Location
    NSW
    Posts
    627

    Default

    no shims they will be fine. they fret rather than spin

    Adrian
    Adrian Wuillemin

  3. #3
    Member shaun1275's Avatar
    Join Date
    Nov 2010
    Location
    Sydney
    Posts
    70

    Default

    Great, thanks Adrian

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •