FS Peugeot 306 s16 parts
  • Register
  • Help
Page 1 of 4 1234 Last
Results 1 to 25 of 81
  1. #1
    Fellow Frogger!
    Join Date
    Jan 2011
    Location
    Canberra/Sydney
    Posts
    166

    Default FS Peugeot 306 s16 parts

    Updated list & discounted prices for 306 S16 parts!!!! (updated 14 December 2011)

    s16 power steering hosing & steering rack with tie rod ends attached (no PS pump though) $40
    Steering column - $25
    s16 alternator (recently replaced brushes) $80
    ECU with small valve thingo attached $80
    loom complete $50
    306 front springs $20 each or both for $35
    Original 306 rear shocks $30 for both (in usable condition with gaiters intact)
    Lucas front brakes, pads & callipers, wishbone & drive shafts $100 for everything on both sides
    Engine mounts – got the 3 types - both new & used
    Rear subframe mounts (2 types) new & used
    Hub Bearings (new) – can’t remember if both front & back – $30 each
    Gates timing belt kit (new) - $150
    All 5 seat belts $50 or $15 each
    Rear seats (very good condition – no rips at all – red chequered pattern velour with leather) $50
    Front door cards $20 each or both for $30
    Dash $40 – in very good nic
    Doors $50 each, with hinges, windows & motor mechanism all in working order (only door cars are detached from doors)
    Rear hatch slightly dented - but glass is good $30
    Sunroof complete mechanism $50
    Various rubber seals boot & doors $30
    Side valances – in good nic - $30 for both (don’t serve a purpose but to make your car look more sporty if it doesn’t have them!)
    Other bits & pieces – let me know what you’re looking for
    Front & rear lights $30 & they're all in top condition (fronts come with the blinkers as well)
    ABS unit $30
    2 rear boot struts $20 for both
    front quarter panels $25 for each side including the side blinker repeaters
    rear quarter windows $30 each
    front subframe $20
    Complete fuel pump stuff $40
    Fuel tank $40












    Gday,

    I was going to use my 306 s16 as a track/rally car after it got some very minor rear-end damage & was deemed a 'repairable writeoff''.I have done a fair amount of work to the car, but I've got too many projects at the moment & not enough space for it amongst other cars.

    This is what I have available. Pick up or freight at the buyer's expense. Willing to do a deal for 2 or more of the below items. If you think any of the prices are unreasonable, please let me know.

    XU10J4 engine with inlet & outlet manifolds, throttle body with all sensors attached (only missing coil packs, injectors and EGR valves, power steering pump, air con, alternator & gearbox) $450 – am willing to sell parts separately (such as sensors, throttle body etc), although I won’t take the cam cover & other key internal components out – as the engine is in very good working condition for a transplant into another 306, 205 or 405. The cam belt & pulleys were replaced 20,000 kms ago along with cam cover gasket.

    Koni sport yellow adjustable front & back shock absorbers (only done genuine 100kms after being mounted after it was written off) they were made in 2010. I have the receipts & they are still under warranty - $500

    306 s16 5 speed manual gearbox $120

    Airbox & all intake piping to the throttle body $80

    s16 power steering pump, hosing & steering rack $100

    s16 alternator (recently replaced brushes) $90

    s16 driveshafts $40 each or $70 for both

    ECU with small valve thingo attached $80

    Wiring loom complete $50

    XU10J4 coil packs $40 each or $120 for all 4

    XU10J4 injectors (X4) - $30 each or $100 for all 4 including fuel rail

    306 front springs $20 each or both for $35

    Original 306 front shocks $20 for both (one not in good condition – but have to check which side)

    Original 306 rear shocks $30 for both (in usable condition with gaiters intact)

    306 complete rear subframe with torsion bars, hubs, brakes & disks (just not rubber mounts) $100

    Lucas front brakes, pads & callipers, control arm & mounts $100 for everything on both sides

    306 S16 Radiator $60

    306 S16 cooling system hoses in good condition $60
    Engine mounts – got the 3 types - both new & used

    Rear subframe mounts (2 types) new & used

    Hub Bearings (new) – can’t remember if both front & back – $30 each

    Gates timing belt kit (new) - $150

    All locks (boot, 2 doors & ignition) with 2 keys $60

    All 4 seat belts $60 or $20 each

    Front seats $40 each (upholstery is good on both), but driver’s side seat mechanism needs work

    Rear seats (very good condition – no rips at all) $60

    Front door cards $30 each or both for $50

    Dash $50 (or $100 with all buttons & knobs)

    Dash buttons & knobs (ask for which you need)

    Instrument cluster (done 180,000kms – in perfect working order & no scratches ($60)

    Doors $70 each, with hinges, windows & motor mechanism all in working order (only door cars are detached from doors)

    Rear hatch slightly dented - but glass is good $40

    Sunroof complete mechanism $60 (although might be already sold to someone)

    Various rubber seal for the boot $30

    Other bits & pieces – let me know what you’re looking for

    late additions to the list

    *front wiper motor, mechanism & wipers $40

    *rear wiper motor (as in photo with the plastic cover $30

    Front & rear lights $30 & they're all in top condition (fronts come with the blinkers as well)
    Fan shroud with 2 fans $40
    ABS unit $30
    Brake master cylinder $30
    2 rear boot struts $30 for both
    front quarter panels $30 for each side including the side blinker repeaters
    rear quarter windows $30 each
    front subframe $20
    Complete fuel pump stuff $40
    Fuel tank $40




    Cheers!

    Owen

    Advertisement
    Attached Thumbnails Attached Thumbnails FS Peugeot 306 s16 parts-dscf2001.jpg   FS Peugeot 306 s16 parts-dscf2003.jpg   FS Peugeot 306 s16 parts-dscf2008.jpg   FS Peugeot 306 s16 parts-dscf2007.jpg   FS Peugeot 306 s16 parts-dscf2009.jpg   FS Peugeot 306 s16 parts-dscf2011.jpg  

    FS Peugeot 306 s16 parts-dscf2012.jpg  
    Last edited by owendaniel; 14th December 2011 at 11:46 AM. Reason: updates

  2. #2
    Tadpole
    Join Date
    Jul 2011
    Location
    Brisbane
    Posts
    15

    Default

    What sort of deal would you do for the steering wheel, sun roof, speakers & carpets?
    And do you have an idea how much it would be to send all that to brisbane?

  3. #3
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,618

    Default

    Hi Owen,

    I'll take the box of interior trim panels-pic 4.

    Can you get a price to send it to Melb, postcode 3129.

    Thanks-Jeff
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  4. #4
    Tadpole
    Join Date
    Oct 2011
    Location
    Tas
    Posts
    2

    Default

    Hi Owen

    Do you still have the Air Con System for sale?

    Cheers

    Daniel

  5. #5
    Fellow Frogger!
    Join Date
    Jan 2011
    Location
    Canberra/Sydney
    Posts
    166

    Default

    I just updated the top post with new parts that are available.

    Cheers,

    Owen

  6. #6
    1000+ Posts cam85's Avatar
    Join Date
    Nov 2003
    Location
    Bondi
    Posts
    3,364

    Default

    Ill take the wring harness and ECU if they are in good working order.

    Cam
    94 205 Gti Classic #9
    91 205 Si
    87 205 GTi Race Car
    http://www.aussiefrogs.com/forum/res...-race-car.html

  7. #7
    1000+ Posts cam85's Avatar
    Join Date
    Nov 2003
    Location
    Bondi
    Posts
    3,364

    Default

    Also the front brakes. Inc Discs, callipers and pads. Thanks

    Cam
    94 205 Gti Classic #9
    91 205 Si
    87 205 GTi Race Car
    http://www.aussiefrogs.com/forum/res...-race-car.html

  8. #8
    Fellow Frogger!
    Join Date
    Jan 2011
    Location
    Canberra/Sydney
    Posts
    166

    Default

    Hi Cam,

    That stuff's got your name on it then.

    I'll have to get busy in the garage tonight!

    I'm in Canberra, where abouts are you?

    UPDATE - I worked on taking the car apart tonight.
    The loom is getting there. I'm trying to label things that don't appear to have obvious connections.




    Quote Originally Posted by cam85 View Post
    Also the front brakes. Inc Discs, callipers and pads. Thanks

    Cam
    Last edited by owendaniel; 26th October 2011 at 11:16 PM.

  9. #9
    Member
    Join Date
    Apr 2011
    Location
    Mount Waverley
    Posts
    91

    Default

    Hi Owen,

    Do you have pictures for:
    "Airbox & all intake piping to the throttle body $80"?
    and are they good? I want to get rid of the pod filter.

    And a quote for freight to Victoria with postcode 3150.

    Also curious is do I need a new rear wiper motor if the rear washer jets are blocked?

    Thanks a lot!

    Mike
    Last edited by xcmike; 26th October 2011 at 10:06 PM.
    306 S16

  10. #10
    Fellow Frogger!
    Join Date
    Jan 2011
    Location
    Canberra/Sydney
    Posts
    166

    Default

    HI Mike,

    The wiper motor includes a hole through the centre of the mount for the wiper mechanism - that squirts through to the jet. Sorry, bad explanation!
    Take the wiper blade head bolt off & clean the jet in the centre if its not squirting. Use a thin wire perhaps. It could be blocked in some other tubing elsewhere though from the washer bottle under the front right guard.

    Mine works though if you figure out that yours isn't working properly.

    You can have it all for $90 if you're keen on the air intake hoses as well. I'll give you all the tubing & washer bottle & pump for an extra $10 if perhaps the washer pump you have isn't working properly.

    The air induction stuff is all in decent condition. I'll include the filter in the airbox as well.
    I've had experiences with pod filters & am a bit sceptical whether they're any good unless mounted well.

    I'll take some more photos tomorrow & post them here & weigh all of the stuff. I reckon postage would be about $15-20 for it all.

    Cheers,

    Owen
    Last edited by owendaniel; 28th October 2011 at 11:01 AM. Reason: update

  11. #11
    Member
    Join Date
    Apr 2011
    Location
    Mount Waverley
    Posts
    91

    Default

    Quote Originally Posted by owendaniel View Post
    HI Mike,

    The wiper motor includes a hole through the centre of the mount for the wiper mechanism - that squirts through to the jet. Sorry, dad explanation!
    Take the wiper blade head bolt off & clean the jet in the centre if its not squirting. Use a thin wire perhaps. It could be blocked in some other tubing elsewhere though from the washer bottle under the front right guard.

    Mine works though if you figure out that yours isn't working properly.

    You can have it all for $90 if you're keen on the air intake hoses as well. I'll give you all the tubing & washer bottle & pump for an extra $10 if perhaps the washer pump you have isn't working properly.

    The air induction stuff is all in decent condition. I'll include the filter in the airbox as well.
    I've had experiences with pod filters & am a bit sceptical whether they're any good unless mounted well.

    I'll take some more photos tomorrow & post them here & weigh all of the stuff. I reckon postage would be about $15-20 for it all.

    Cheers,

    Owen
    Hi Owen,

    Thanks for the explanation. The front jets work and the pump makes a noise when i use the rear jets, just that it doesn't squirt anything....

    I will take the airbox and intake hoses for sure as i really want the pod filter out of the engine bay but I'll need to investigate the rear washer jet. Unfortunately uni exams starts next week for me so need to wait until mid-November...
    If you are keen to get rid of the stuff asap, please let me know and I will decide if I take the wiper motor + bottle + washer pump as well

    Thanks again.

    Mike
    306 S16

  12. #12
    Member Simon888's Avatar
    Join Date
    Jan 2011
    Location
    Sydney
    Posts
    101

    Default

    What size are the brakes?

  13. #13
    Member Simon888's Avatar
    Join Date
    Jan 2011
    Location
    Sydney
    Posts
    101

    Default

    PM sent. I've worked out the brake size.

  14. #14
    Tadpole
    Join Date
    Oct 2011
    Location
    Launceston
    Posts
    4

    Icon14

    Hi Daniel

    Do you still have the indicator stalk assembly? I have a '96 306 XT. Im assuming it would be the same. If so, how much do you want for it?

    regards

    Matt

  15. #15
    Fellow Frogger!
    Join Date
    Jan 2011
    Location
    Canberra/Sydney
    Posts
    166

    Default

    Simon, i've only got the rear brakes as front are pending pickup. But $30 for the rears if you're keen for them (hubs, calipers, disks & pads).

    Matt, $30 sound alright for the complete wiper stork assembly (both sides)?

    UPDATE of other parts for sale:

    Front & rear lights $30 & they're all in top condition (fronts come with the blinkers as well)
    Fan shroud with 2 fans $40
    ABS unit $30
    Brake master cylinder $30
    2 rear boot struts $30 for both
    front quarter panels $30 for each side including the side blinker repeaters
    rear quarter windows $30 each
    front subframe $20

    If you want anything else that's not listed, please just ask.
    Attached Thumbnails Attached Thumbnails FS Peugeot 306 s16 parts-dscf2092.jpg   FS Peugeot 306 s16 parts-dscf2096.jpg   FS Peugeot 306 s16 parts-dscf2101.jpg   FS Peugeot 306 s16 parts-dscf2105.jpg   FS Peugeot 306 s16 parts-dscf2113.jpg   FS Peugeot 306 s16 parts-dscf2115.jpg  

    FS Peugeot 306 s16 parts-dscf2117.jpg  

  16. #16
    Member Simon888's Avatar
    Join Date
    Jan 2011
    Location
    Sydney
    Posts
    101

    Default

    Quote Originally Posted by owendaniel View Post
    Simon, i've only got the rear brakes as front are pending pickup. But $30 for the rears if you're keen for them (hubs, calipers, disks & pads).

    Matt, $30 sound alright for the complete wiper stork assembly (both sides)?

    UPDATE of other parts for sale:

    Front & rear lights $30 & they're all in top condition (fronts come with the blinkers as well)
    Fan shroud with 2 fans $40
    ABS unit $30
    Brake master cylinder $30
    2 rear boot struts $30 for both
    front quarter panels $30 for each side including the side blinker repeaters
    rear quarter windows $30 each
    front subframe $20

    If you want anything else that's not listed, please just ask.
    If the pick up doesnt happen , let me know. I'm only intrested in the brakes at this stage

  17. #17
    Tadpole
    Join Date
    Oct 2011
    Location
    Launceston
    Posts
    4

    Default

    Hi OWen

    Yeah that sounds fine for the indicator stalk. Just to make sure its the same part, its got NEIMAN MADE IN FRANCE 6156 on the top face. That will be great. let me know how to get banking details.

    Cheers

    Matt

  18. #18
    Tadpole
    Join Date
    Nov 2011
    Location
    Sydney
    Posts
    6

    Default

    Hi Owen,

    Is the inlet manifold for sale??

    Cheers,

    Luke.

  19. #19
    Fellow Frogger!
    Join Date
    Jan 2011
    Location
    Canberra/Sydney
    Posts
    166

    Default

    Hi Matt, I'll check tonight if that's whats written on it. If so, I'll send you a PM tonight with my bank details.

    Luke, the engine is for sale compete with the inlet manifold. I want to sell the engine complete as its in good nic & good for a straigth drop into a 306, 205 or 405. Sorry about that.

    Also, I've got the fuel pump, lines & tank if anyone is keen for that stuff. The tank would be good to use as a replacement or to provide protection on a rally car. No leaks!
    Last edited by owendaniel; 2nd November 2011 at 01:37 PM.

  20. #20
    Fellow Frogger!
    Join Date
    Jan 2011
    Location
    Canberra/Sydney
    Posts
    166

    Default

    Hi Matt,

    The wiper stalk I have says "Jaeger made in France" though.

    But I can't see NEIMAN MADE IN FRANCE 6156 anywhere. The centre mounting has 'valeo PA66GF30' and '61557109'.

    Does the fitting appear the same?
    Attached Thumbnails Attached Thumbnails FS Peugeot 306 s16 parts-dscf2164.jpg   FS Peugeot 306 s16 parts-dscf2165.jpg  

  21. #21
    Tadpole
    Join Date
    Oct 2011
    Location
    Launceston
    Posts
    4

    Default

    Hi Owen

    It looks very close to me. Different maker but the plug should still fit. I'll go for it I think. Thanks for going through the trouble. Can you give me you details. I can give you my number if you prefer.

    cheers

    Matt

  22. #22
    Tadpole
    Join Date
    Nov 2011
    Location
    Regents Park
    Posts
    2

    Default

    Hi Owen

    Please reserve the following if still available.

    Fan shroud with 2 fans $40
    XU10J4 coil packs $40 each or $120 for all 4
    Front & rear lights $30 & they're all in top condition (fronts come with the blinkers as well)
    tubing & washer bottle & pump (2nd dibs if Mike doesnt take it) I lost the cover for the washer bottle.

    Do you still have the bonnet and how much for the side mirrors?

    Thanks!

    Chris
    Last edited by ispayks; 3rd November 2011 at 10:48 PM.

  23. #23
    Fellow Frogger!
    Join Date
    Jan 2011
    Location
    Canberra/Sydney
    Posts
    166

    Default

    Hi Chris,

    You can have the 4 coil packs.
    Fans & fan shroud has your name on it.
    For the lights - I meant to say $30 a piece - but you can have them all for $100 if that sounds alright?
    You can have the washer bottle & pump as I think mikes problem isn't the pump.
    Side mirrors you can have for $35 for both
    The bonnet you can have for free with the above - but its got a few holes in it from where I put in 2 bonnet latches & also has one dent.
    You can have all of the above for $270 if that sounds alright to you?

    Owen

    Quote Originally Posted by ispayks View Post
    Hi Owen

    Please reserve the following if still available.

    Fan shroud with 2 fans $40
    XU10J4 coil packs $40 each or $120 for all 4
    Front & rear lights $30 & they're all in top condition (fronts come with the blinkers as well)
    tubing & washer bottle & pump (2nd dibs if Mike doesnt take it) I lost the cover for the washer bottle.

    Do you still have the bonnet and how much for the side mirrors?

    Thanks!

    Chris
    Last edited by owendaniel; 4th November 2011 at 10:48 AM.

  24. #24
    Tadpole
    Join Date
    Nov 2011
    Location
    Sydney
    Posts
    15

    Default

    Hi Owen, Can i have dibs on the front seats if they are still available please?

  25. #25
    Tadpole
    Join Date
    Nov 2011
    Location
    Sydney
    Posts
    15

    Default

    not sure of the status of "But $30 for the rears if you're keen for them (hubs, calipers, disks & pads)".... but if they are available, i'm keen on them too. cheers

Page 1 of 4 1234 Last

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •