Mi16 parts - wrecking whole car
  • Register
  • Help
Results 1 to 22 of 22
  1. #1
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default Mi16 parts - wrecking whole car

    Must be the day for wrecking Mi16's in Tassie!!!

    Have now sold our good Mi16 so wanting to offload parts from the spare car..... need it all gone!!!

    Its a S1 405 Mi16 black in colour. Plenty of parts left, some stuff gone, best to ask if I've still got what you need.

    Some things worth mentioning:
    BE1 (I believe) gearbox - reverse is up and to the left of 1st.
    There is a motor, with head off - but the block has one snapped head bolt (so good for spare pistons rods etc) and the head has 4 bent exhaust valves - Perfect if you want some cams to get ground!
    Set of 5x 15" alloys - the ones that look sort of like simmons b45's.
    Koni shocks in the rear - This car actually raced in Targa Tas at one point!!
    Set of braided brake lines for the front..... oh and it also has ABS.

    All parts are make a reasonable offer.
    Car located in Launceston, Tas.

    Best contactable via email: [email protected]

    Advertisement

  2. #2
    Member JoshD's Avatar
    Join Date
    Oct 2003
    Location
    Hobart
    Posts
    32

    Default

    Thats 2 less Mi16's in Tassie. Can't be many left now??

  3. #3
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default

    Bump.

    Don't be scared to make an offer peoples. Just want stuff gone!

  4. #4
    1000+ Posts Pugnut403's Avatar
    Join Date
    Mar 2003
    Location
    Tasmania
    Posts
    1,419

    Default

    You have a PM...
    Pugs Rule!

    403, now sold
    404, project
    2010 Mitsubishi i MiEV electric car

  5. #5
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default

    Bit of an update - Nothing sold yet but interest in the following:
    Rear shocks
    Braided lines
    Cams/Cam pulleys
    Maybe remainder of head but ask for specific parts you want
    Dizzy
    Coil

    Someone also asked about a crank but haven't heard back. I am willing to pull the bottom end apart if people want rods, slugs, sump, waterpump etc?

    Still also have the wheels, although I'm now aware they're 14"
    Gearbox is still here too. What do they normally go for? $100??

  6. #6
    Fellow Frogger! Davo81's Avatar
    Join Date
    Mar 2011
    Location
    Kyneton, Victoria
    Posts
    180

    Default

    PM'ed and emailed..

  7. #7
    Member
    Join Date
    Jul 2011
    Location
    Gold Coast Australia
    Posts
    48

    Default

    Hi puggone, I am after the alternator, am on the gold coast 4227.
    Thanks,Dave.
    Last edited by xray; 29th July 2011 at 10:23 AM. Reason: edit

  8. #8
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default

    Hey guys,

    Property were this is being stored in Launy has been sold. Need to get rid of it asap.

    Will take $100 for the whole car just to get rid of it. Few parts have been sold but still 90% of a car. Front alignment isn't great as the driveshafts are out but is still rolling.

    Contact me asap for a bargain!!!

    Cheers,
    Si.

  9. #9
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default

    Ok so quick update.....

    Didn't end up selling the whole car. Have now moved it to another property so can continue wrecking it.

    If you think I might have something you need then shoot me a message and I'll let you know.

    Cheers,
    Si.

  10. #10
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default

    still got bits!

  11. #11
    Fellow Frogger! R10S FAN's Avatar
    Join Date
    Aug 2004
    Location
    Mt Barker S.A.
    Posts
    392

    Default

    Do u have a drivers window six pin power window switch in good working condition?

    Anthony
    Current Frogs:


    1964 Renault 8 (1289 / Sonics)
    1968 Renault 10 (Modified 1.4L Alpine White)

  12. #12
    1000+ Posts Pugnut403's Avatar
    Join Date
    Mar 2003
    Location
    Tasmania
    Posts
    1,419

    Default

    Has the head still got the dizzy cap and rotor button on it in decent nick?
    Mine died just before Christmas break, terminals corroded badly.
    Just trying to get half decent secondhand stuff to get it running for a few weeks till I get new ones.
    None available in Hobart so I either order from the mainland at a price or get them from the uk for less than half the price but I have to wait a few weeks for them to get here...
    Plug leads maybe too...one of mine lost it's end fitting when I pulled it off to check.
    Pugs Rule!

    403, now sold
    404, project
    2010 Mitsubishi i MiEV electric car

  13. #13
    Tadpole
    Join Date
    Nov 2010
    Location
    Mt Evelyn
    Posts
    17

    Default Still got bits

    Do you still have the Konis? How much did you want for them please?

  14. #14
    Tadpole
    Join Date
    Jan 2005
    Location
    Melbourne
    Posts
    17

    Default

    FYI i had same issue with my mi16 recently - got replacement new dizzy, rotor button and leads from guys at Caravelle in Melb always helpful and very reasonable price. Caravelle Imports (03) 98909061

  15. #15
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default

    Quote Originally Posted by R10S FAN View Post
    Do u have a drivers window six pin power window switch in good working condition?

    Anthony
    I would still have it, but the car is probably a bit too far stipped to check it now.
    Might have to go pull it out and run a multimetre over it for you.

    Will let you know.

    Konis are long gone sorry Paul.

    Pugnut - Inlet cam is gone so no dizzy internals, would have a cap laying round somewhere though, as well as a set of leads but one has a dodgy end like yours.
    I bought a set of new Top Gun leads for ours from Bursons, wasn't too expensive from memory.

  16. #16
    1000+ Posts Pugnut403's Avatar
    Join Date
    Mar 2003
    Location
    Tasmania
    Posts
    1,419

    Default

    Will check bursons....how muck for the cap?
    Mine's stuffed....
    Pugs Rule!

    403, now sold
    404, project
    2010 Mitsubishi i MiEV electric car

  17. #17
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default

    I'll have to double check it still in the shed somewhere.

    .... think you know my preferred method of payment for what I class as consumable items anyway!

  18. #18
    1000+ Posts Pugnut403's Avatar
    Join Date
    Mar 2003
    Location
    Tasmania
    Posts
    1,419

    Default

    6 pack for the cap and leads?
    I need at least one usable lead for #3 and a usable cap...
    Only a stopgap till I've paid off a few bills and get the right parts brand new...
    Pugs Rule!

    403, now sold
    404, project
    2010 Mitsubishi i MiEV electric car

  19. #19
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default

    6'er would be fine.

    Standby.....

  20. #20
    Tadpole
    Join Date
    Jun 2011
    Location
    Tassie
    Posts
    10

    Default

    Quote Originally Posted by puggone View Post
    Standby.....
    Roger on all of the above.

  21. #21
    1000+ Posts Pugnut403's Avatar
    Join Date
    Mar 2003
    Location
    Tasmania
    Posts
    1,419

    Default

    Will almost certainly be in Launnie on sun 5th feb...but I'll be going through pretty early...
    Maybe arrange to leave on doorstep and I'll leave the goodies...
    Might need to get the address off you again too....
    Might be up at a sane time on 29th but not confirmed.
    Pugs Rule!

    403, now sold
    404, project
    2010 Mitsubishi i MiEV electric car

  22. #22
    Tadpole
    Join Date
    Sep 2011
    Location
    North Avoca
    Posts
    24

    Default Mi 16 bits.

    hi, Im after the window regulator (electric) for the drivers door.

    an original gear stick knob.

    passenger side grill bit that goes under the head light.

    fog light surrounds..

    Thanks, give us a call 0414183803 and I'll ring you back

    Many thanks
    Cheers Wayne

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •