Another Shed Clearance
  • Register
  • Help
Page 1 of 2 12 Last
Results 1 to 25 of 45
Like Tree4Likes

Thread: Another Shed Clearance

  1. #1
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default Another Shed Clearance

    * GTi6 Inlet Manifold complete with throttle body, fuel rail & (green) injectors. $300.

    * GTi6 Exhaust spaghetti manifold. $100. SOLD

    Advertisement


    * GTi6 stainless steel extractors back 2 1/2” exhaust system. High flow cat, centre resonator and rear muffler. Best suited for a tuned engine. $400.

    * 2 x GTi6 cyl heads some damage to one. One with cams, and one cam pulley on second head has been sold. There’s enough to make one VG complete head. $125 both.

    * 2 x 405 plastic dash pieces at the bottom of the windscreen. Free.

    * 1 x XU10J4R cyl head. Removed from an 2 litre auto at Imlach’s. Complete with coils (they are different to GTi6 ones). Same valve sizes as an Mi16 head. $80.

    * XU10J4 cast iron engine mount which bolts to the iron block including the connecting piece across to the body engine mount. Comes with all bolts. $75.

    * XU9J4 alloy block from my race car. Helicoiled head bolt threads, forged 83.5mm pistons, shot peened rods, ARP conrod bolts. Balanced rotating assembly. $750.

    * XU9J4 Baffled sump, windage tray on modified spacer, oil pump extended & modified. $150. SOLD

    * XU9J4 alloy block $50.

    * XU9J4 4-1 custom exhaust manifold (9 bolt) for 405. Heat treated. $125.

    * XU9J4 throttle body. $20.

    * TTV lightweight flywheel for 215mm clutch, 2.9kg. Std 60-2 timing teeth. Includes 6 x 7mm cap head clutch cover bolts.
    Suit Mi16 (1.9 & 2.0 litre), GTi6, etc. $300 SOLD

    * 406 283mm callipers. Also a good upgrade as it fits a 405. $75 pair.

    * XU10 block with oil sprays. $75.

    * XU10 baffled sump-winged type. $50. SOLD

    * Mi16 & 205 gearboxes (3ish in total) $100 the lot.

    * XU10 Windage tray $50.

    More items added-

    * 4 x Bosch xxx xxx 762 fuel injectors suit 1.9 Mi16 and (I think) 8v as well. $50.

    * XU9J4 modified breather/catch can system for quad throttle bodies using Baker BM hoses to head and block, mounts to bell housing. $100. Still available.

    * Various AN12 & AN10 fittings for braided hose. Brand new. Approx 10 in total. $125 lot.

    * 2 x 215mm flywheels, 1 standard $40 and 1 lightened by approx half kilo $60. Suit 1.9 & 2.0 litre Mi16, GTi6. Lightened one SOLD

    * Autometer 2" 0-100 psi oil pressure gauge including copper & nylon lines, fittings, olives, etc. $100.

    * Earle's inline oil filter AN10. $40.

    * Peterson remote oil pressure valve AN10. Trial fitted but never used. $150.

    ___________________

    More items-

    * 08290 20 Cambelt tensioner pulley. SKF brand. Suit 306 2 litre, 309, 405. New $25.

    * 0830 28 Cambelt tensioner pulley. SKF brand. Suit M59 Partner van. New $25.

    ___________________

    More items-

    * 2 x XU9J4/XU10J4 #2 Cam gears $40 each.

    * ACL Duraglide 780 Tri metal Conrod bearing sets .30 undersize P/no- 4B1670 .30. Suit Peugeot/Citroen XU (possibly EW) crankshafts. 2 sets available $80 each. 1 set SOLD

    * GTi6 engine pipe with Cat. $125. SOLD

    ___________________

    And more-

    * XUD9 88mm Forged crank. Balanced $250.

    ___________________

    * 405 series 1 K frame, lower control arms and hubs, (bushes and bearings replaced not long ago). $150.

    ___________________

    * XU9J4 Cambelt. New $35.

    * XU10J4R Cambelt. New $35.

    * 405 Mi16 P/steering belt (for gearbox mounted pump). New $20.

    * XU9J4 Camtech Performance Cams (2) for use with standard hydraulic lifters.

    Adv Duration-272
    Lift @ 0.050”-236
    Cam Lift-0.448”
    Lift @ Valve-11.38mm
    Lift @ TDC-0.111” (2.82mm)
    Intake Centreline 106
    Lobe separation angle 108

    $400

    ** I will add items when they are unearthed from my sheds.



    Need it all gone so make an offer.

    Will post smaller items otherwise local pick up.
    Last edited by pgti6; 16th June 2019 at 11:36 AM.
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  2. #2
    Fellow Frogger!
    Join Date
    Nov 2010
    Location
    Melbourne
    Posts
    265

    Default

    Hey mate,

    I'll grab the

    * XU9J4 Baffled sump, windage tray on modified spacer, oil pump extended & modified.


    Get on to you this weekend

    Cheers,

    Gil
    BIKEPUG likes this.

  3. #3
    Fellow Frogger! Codman's Avatar
    Join Date
    Feb 2015
    Location
    Skye, Victoria
    Posts
    520

    Default

    G'day Jeff, * XU10 baffled sump-winged type. $50 for me please!
    Current -
    65' 404 Sedan,
    88' 205 GTI/16V
    92' 505 Custom Turbo Wagon
    92' 205 SI
    88' 505 GTI Wagon - PARTING OUT PM ME


    Gone -
    04' 206 RC (GTI180)
    2 X 405 STI,
    405 MI16
    98' 406 Coupe
    406 2l
    91' 205 SI
    306 Style,
    3 X 306 GTI6

  4. #4
    1000+ Posts djvu205's Avatar
    Join Date
    Nov 2010
    Location
    3550
    Posts
    1,397

    Default

    Ill take $100 spaghetti manifold and possibly the ttv flywheel.

  5. #5
    1000+ Posts cam85's Avatar
    Join Date
    Nov 2003
    Location
    Bondi
    Posts
    3,299

    Default

    Hi Jeff. Are the 405 plastic panels the ones that usually crack? If there not cracked Ill take them. Heading down to Melbourne next month if that works?
    98 Xantia CT
    94 205 Gti Classic #9
    92 405 Mi16
    87 205 GTi Race Car
    http://www.aussiefrogs.com/forum/res...-race-car.html

  6. #6
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    All items moved into Post #1.
    Last edited by pgti6; 29th March 2019 at 05:30 PM.
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  7. #7
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,103

    Default

    I'll take the light flywheel and the breather system.

  8. #8
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    Quote Originally Posted by cam85 View Post
    Hi Jeff. Are the 405 plastic panels the ones that usually crack? If there not cracked Ill take them. Heading down to Melbourne next month if that works?
    Yes. One has missing end attachment, the other complete but one end attachment broken but an easy repair. The 2 for $40 if req'd.
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  9. #9
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    Quote Originally Posted by GRAHAM WALLIS View Post
    I'll take the light flywheel and the breather system.
    No problems Graham.
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  10. #10
    Fellow Frogger!
    Join Date
    Nov 2010
    Location
    Melbourne
    Posts
    265

    Default

    I'm out for the xu9 baffled sump kit. Sorry for mess about.

  11. #11
    1000+ Posts
    Join Date
    Mar 2004
    Location
    Brisbane
    Posts
    1,642

    Default

    I will take it then please, xu9 baffled sump that is? Can arrange for pick up and cash.
    87 S1 205 GTI / GTI6 powered a project underway
    306 convertible (gti6 candidate)
    307 HDi wagon
    407 HDi wagon

  12. #12
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,103

    Default

    Quote Originally Posted by pgti6 View Post
    No problems Graham.
    I'll ask you about how to adapt it to an XU10 with XU9 head, seems to be an extra pipe running into the sump?

  13. #13
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    Quote Originally Posted by GRAHAM WALLIS View Post
    I'll ask you about how to adapt it to an XU10 with XU9 head, seems to be an extra pipe running into the sump?
    Isn't there still only 2 on the iron block with the second one now above the starter?
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  14. #14
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,103

    Default

    Could be, goes right to the bottom of the sump though.

  15. #15
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    More items added. See post #6.
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  16. #16
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,103

    Default

    I'll take one set of the .3 mm bearings

  17. #17
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    Quote Originally Posted by Matthew View Post
    I will take it then please, xu9 baffled sump that is? Can arrange for pick up and cash.
    No worries Matt.
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  18. #18
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,103

    Default

    Can I come over in the morning to pick up Jeff? Do you have an XU10j4 cam belt?

  19. #19
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    Quote Originally Posted by GRAHAM WALLIS View Post
    Can I come over in the morning to pick up Jeff? Do you have an XU10j4 cam belt?
    Yes (after 10 am OK?) & yes.
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  20. #20
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,103

    Default

    Great, see you at 1000. Trying to get the XU10 back together and in the car this week. Didn't think that the XU9 belt may have been different.

  21. #21
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    List updated. More items added.

    See posts 1 & 6.
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  22. #22
    Tadpole
    Join Date
    Aug 2015
    Location
    sydney
    Posts
    6

    Default

    Hi pgti6, is the xu10 sump still available? Desperately need one to get my car out of my mechanic's garage. Happy to negotiate!

  23. #23
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    I've PM'd the person who wanted it. If it becomes available I'll let you know.

    Thanks.


    Quote Originally Posted by thomasrc View Post
    Hi pgti6, is the xu10 sump still available? Desperately need one to get my car out of my mechanic's garage. Happy to negotiate!
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

  24. #24
    Fellow Frogger! Codman's Avatar
    Join Date
    Feb 2015
    Location
    Skye, Victoria
    Posts
    520

    Default

    Quote Originally Posted by pgti6 View Post
    I've PM'd the person who wanted it. If it becomes available I'll let you know.

    Thanks.
    Sorry Jeff, forgot to follow up with you, however it was only to be a spare for me, seems Thom my be more in need so all his.
    I apologize again!

    Cal
    pgti6 likes this.
    Current -
    65' 404 Sedan,
    88' 205 GTI/16V
    92' 505 Custom Turbo Wagon
    92' 205 SI
    88' 505 GTI Wagon - PARTING OUT PM ME


    Gone -
    04' 206 RC (GTI180)
    2 X 405 STI,
    405 MI16
    98' 406 Coupe
    406 2l
    91' 205 SI
    306 Style,
    3 X 306 GTI6

  25. #25
    1000+ Posts pgti6's Avatar
    Join Date
    May 2001
    Location
    Melbourne
    Posts
    1,602

    Default

    Updated 15 June. See post #1.
    Last edited by pgti6; 15th June 2019 at 01:00 PM.
    Track car-Steel Grey 405 Mi16 2.2 litre


    405 Track car build thread moved to-
    http://forum.205gtidrivers.com/index...ic=143279&st=0

    Lap times-
    Sandown 1 27.9
    Phillip Island 1 53.8

    Previous Frenchies-
    1988 205Gti
    1998 306 GTi6
    1997 306 N5 sedan
    1996 306 N3 XT hatch
    1976 Renault R16TS manual in Avocado
    1976 Renault R16TS manual in Trak Yellow
    1975 Renault 5 Guernsey, Channel Islands
    1972 Renault 4 Guernsey, Channel Islands

Page 1 of 2 12 Last

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (1 members and 1 guests)

  1. Matthew

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •