205 GTI s3 - parts wanted
  • Register
  • Help
Results 1 to 11 of 11
Like Tree1Likes
  • 1 Post By Matthew

Thread: 205 GTI s3 - parts wanted

  1. #1
    1000+ Posts Richard W's Avatar
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,173

    Default 205 GTI s3 - parts wanted

    Hi guys. I'm looking forsome parts for a new project car. Isanyone able to help with any of the following?
    Dashboard – ie, the whole top section that boltsto the firewall
    Interior light
    high level taillight for the rear hatch
    one of the little trims that goes around theinterior lock button;
    Passenger side wing mirror interior trim (ie,the trianglar piece of plastic that the remote adjuster lever sticks through -doesn't matter if the mounting tabs are broken)
    window scrapers (ie outside window seals - bothpassenger and drivers side)
    Parts to restore green half leather front seats. Happy to pay good money if anyone has areasonable half leather seat (or two) tucked away that they might be preparedto sell, but even just some right hand side bolsters (both the base and theseatback eg, from a dead passenger seat?) would help.
    A standard rear muffler

    Thanks
    Richard

    Advertisement
    Last edited by Richard W; 9th October 2017 at 05:15 PM.

  2. #2
    1000+ Posts PeterT's Avatar
    Join Date
    Jul 2000
    Location
    Castle Hill, Sydney
    Posts
    7,004

    Default

    This?
    Attached Thumbnails Attached Thumbnails 205 GTI s3 - parts wanted-img_6536.jpg  

    '92 205 Mi16
    '90 Mi16x4

  3. #3
    1000+ Posts Richard W's Avatar
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,173

    Default

    Actually just this bit:
    205 GTI s3 - parts wanted-peugeot-205-1_9-1900-interior-light-544-p.jpg

    So I probably shouldn't have said "assembly". But happy to buy the whole assembly that you've pictured if necessary.

    Thanks
    Richard

  4. #4
    1000+ Posts PeterT's Avatar
    Join Date
    Jul 2000
    Location
    Castle Hill, Sydney
    Posts
    7,004

    Default

    Sorry, just discovered it's my last one. I'll keep it as a spare for the 405, as they're identical.

    '92 205 Mi16
    '90 Mi16x4

  5. #5
    1000+ Posts Richard W's Avatar
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,173

    Default

    Thanks anyway. Cal has just come back saying he may be able to help on that one and a couple of the other parts I need.

    Is there anyone out there hoarding a decent green half leather front seat that I could offer good money for??? Or someone who's built a race car and put aside the original rear muffler that was on their car??

  6. #6
    1000+ Posts
    Join Date
    Mar 2004
    Location
    Brisbane
    Posts
    1,069

    Default

    Richard, I have one of those lights, no use to me!
    redsnapper likes this.
    87 S1 205 GTI / GTI6 powered a project underway

  7. #7
    1000+ Posts Richard W's Avatar
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,173

    Default

    Thanks Matt. I think that's one of the parts that Cal may have sorted for me. Did you have a standard rear muffler before the big bore exhaust went on?


    Sent from my iPad using Tapatalk

  8. #8
    1000+ Posts
    Join Date
    Mar 2004
    Location
    Brisbane
    Posts
    1,069

    Default

    Sorry maggot let it rust away.
    87 S1 205 GTI / GTI6 powered a project underway

  9. #9
    Member flock's Avatar
    Join Date
    Feb 2014
    Location
    Brisbane, Australia
    Posts
    118

    Default

    If you have access to a 3D printer you can print out a bracket that fixes the fingers on the interior light if yours is broken:

    http://www.thingiverse.com/thing:227402

    Translated:
    "It is a prosthesis for the interior light of the Peugeot 205. The interior light is embedded in the roof of the passenger compartment through eyelashes that deteriorate and break over time, causing the light to go off.
    With this prosthesis it is possible to recreate all the lashes (or only those that have broken) and hook it to the light through two lateral hooks, and of four other front and rear that are inserted in the rest of the broken eyelashes (the photo shows how).
    Instructions

    If you have only broken some tabs, you can comment on the source that part of the code that generates the ones that still serve you.
    I should point out that there is a slight difference in height between the flanges that makes the top reinforcement not exactly parallel to the light device; despite this, the piece is fully functional."

  10. #10
    1000+ Posts Richard W's Avatar
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,173

    Default

    Thanks Flock - 3D printing has to be the way of the future with all the 205s dodgy out of production plastic pieces. Unfortunately my light is corroded as well as the plastic tabs being broken...

  11. #11
    Tadpole redsnapper's Avatar
    Join Date
    Jul 2016
    Location
    Broadview
    Posts
    10

    Default

    Quote Originally Posted by Matthew View Post
    Richard, I have one of those lights, no use to me!
    Hi, if the light has all the tabs and works I am interested. Cheers Tim


    Sent from my Moto G (5) Plus using aussiefrogs mobile app
    1992 205 GTi
    2009 Skoda Octavia VRS Wagon

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •