205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.
  • Register
  • Help
Results 1 to 10 of 10
  1. #1
    Fellow Frogger!
    Join Date
    Aug 2011
    Location
    Melbourne
    Posts
    184

    Default 205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.

    Hi all

    Following the recent sale of my 205 I have a few bits and pieces laying around that hopefully someone else can put to use.
    1. I have a Bosch Jetronic ECU (p/n: 0 280 000 345) that has been remapped and came from PeterT. Didn't get around to fitting it so is as arrived from Peter. Asking $50.
    2. I also have what I think is a 205 CV boot. It is in god condition, uncracked and very pliable. Not entirely sure as it came with my 205. I'm sure one of the gurus here can identify it from 50 paces! Open to offers.
    3. I also have a harness bar that was custom made for the 205 body shell. It is a direct bolt in to the factory rear upper seat belt mounts. It is made from 2 inch steel tube so is pretty strong and has been powder coated in black. Asking $175
    4. I have a pair of red RPM 4 point harnesses which are in great condition. Dated 10/12/2009. Asking $175 for the pair. May consider bulk deal with harness bar.
    5. Finally, I have a set of 'Momo' pedal pads. Not sure if they are genuine or not but they are used and they look alright and are easy to bolt in and out. Asking $15.


    Drop me a pm if you are interested in any of these bits.
    I'm happy to receive reasonable offers and can post at buyers expense.

    Advertisement


    Cheers

    Jez

    205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.-img_3439.jpg205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.-img_3440.jpg205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.-img_3441.jpg205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.-img_3442.jpg205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.-img_3443.jpg205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.-img_3446.jpg205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.-img_3447.jpg205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.-img_3448.jpg205 bits - ECU, CV boot, Harness bar, harnesses, pedal pads.-img_3452.jpgen

  2. #2
    Fellow Frogger!
    Join Date
    Aug 2011
    Location
    Melbourne
    Posts
    184

    Default

    Quote Originally Posted by Jezwillow View Post
    Hi all

    Following the recent sale of my 205 I have a few bits and pieces laying around that hopefully someone else can put to use.
    1. I have a Bosch Jetronic ECU (p/n: 0 280 000 345) that has been remapped and came from PeterT. Didn't get around to fitting it so is as arrived from Peter. Asking $50.
    2. I also have what I think is a 205 CV boot. It is in god condition, uncracked and very pliable. Not entirely sure as it came with my 205. I'm sure one of the gurus here can identify it from 50 paces! Open to offers.
    3. I also have a harness bar that was custom made for the 205 body shell. It is a direct bolt in to the factory rear upper seat belt mounts. It is made from 2 inch steel tube so is pretty strong and has been powder coated in black. Asking $175
    4. I have a pair of red RPM 4 point harnesses which are in great condition. Dated 10/12/2009. Asking $175 for the pair. May consider bulk deal with harness bar.
    5. Finally, I have a set of 'Momo' pedal pads. Not sure if they are genuine or not but they are used and they look alright and are easy to bolt in and out. Asking $15.


    Drop me a pm if you are interested in any of these bits.
    I'm happy to receive reasonable offers and can post at buyers expense.

    Cheers

    Jez

    Click image for larger version. 

Name:	IMG_3439.jpg 
Views:	213 
Size:	100.0 KB 
ID:	40728Click image for larger version. 

Name:	IMG_3440.jpg 
Views:	205 
Size:	100.2 KB 
ID:	40729Click image for larger version. 

Name:	IMG_3441.jpg 
Views:	207 
Size:	97.8 KB 
ID:	40730Click image for larger version. 

Name:	IMG_3442.jpg 
Views:	215 
Size:	93.2 KB 
ID:	40731Click image for larger version. 

Name:	IMG_3443.jpg 
Views:	207 
Size:	86.6 KB 
ID:	40732Click image for larger version. 

Name:	IMG_3446.jpg 
Views:	212 
Size:	93.5 KB 
ID:	40733Click image for larger version. 

Name:	IMG_3447.jpg 
Views:	204 
Size:	93.0 KB 
ID:	40734Click image for larger version. 

Name:	IMG_3448.jpg 
Views:	219 
Size:	98.2 KB 
ID:	40735Click image for larger version. 

Name:	IMG_3452.jpg 
Views:	198 
Size:	88.3 KB 
ID:	40736en
    Harness bar is sold. Thanks

  3. #3
    Fellow Frogger!
    Join Date
    Aug 2011
    Location
    Melbourne
    Posts
    184

    Default

    Quote Originally Posted by Jezwillow View Post
    Hi all

    Following the recent sale of my 205 I have a few bits and pieces laying around that hopefully someone else can put to use.
    1. I have a Bosch Jetronic ECU (p/n: 0 280 000 345) that has been remapped and came from PeterT. Didn't get around to fitting it so is as arrived from Peter. Asking $50.
    2. I also have what I think is a 205 CV boot. It is in god condition, uncracked and very pliable. Not entirely sure as it came with my 205. I'm sure one of the gurus here can identify it from 50 paces! Open to offers.
    3. I also have a harness bar that was custom made for the 205 body shell. It is a direct bolt in to the factory rear upper seat belt mounts. It is made from 2 inch steel tube so is pretty strong and has been powder coated in black. Asking $175
    4. I have a pair of red RPM 4 point harnesses which are in great condition. Dated 10/12/2009. Asking $175 for the pair. May consider bulk deal with harness bar.
    5. Finally, I have a set of 'Momo' pedal pads. Not sure if they are genuine or not but they are used and they look alright and are easy to bolt in and out. Asking $15.


    Drop me a pm if you are interested in any of these bits.
    I'm happy to receive reasonable offers and can post at buyers expense.

    Cheers

    Jez

    Click image for larger version. 

Name:	IMG_3439.jpg 
Views:	213 
Size:	100.0 KB 
ID:	40728Click image for larger version. 

Name:	IMG_3440.jpg 
Views:	205 
Size:	100.2 KB 
ID:	40729Click image for larger version. 

Name:	IMG_3441.jpg 
Views:	207 
Size:	97.8 KB 
ID:	40730Click image for larger version. 

Name:	IMG_3442.jpg 
Views:	215 
Size:	93.2 KB 
ID:	40731Click image for larger version. 

Name:	IMG_3443.jpg 
Views:	207 
Size:	86.6 KB 
ID:	40732Click image for larger version. 

Name:	IMG_3446.jpg 
Views:	212 
Size:	93.5 KB 
ID:	40733Click image for larger version. 

Name:	IMG_3447.jpg 
Views:	204 
Size:	93.0 KB 
ID:	40734Click image for larger version. 

Name:	IMG_3448.jpg 
Views:	219 
Size:	98.2 KB 
ID:	40735Click image for larger version. 

Name:	IMG_3452.jpg 
Views:	198 
Size:	88.3 KB 
ID:	40736en

    I've had a few people ask about the ECU.

    PeterT advised that:
    "It will richen the light throttle/mid range. Ideally to suit a performance engine."

    I don't know much more about it than that as I haven't fitted it to a car myself.

    Cheers

    Jez

  4. #4
    1000+ Posts PeterT's Avatar
    Join Date
    Jul 2000
    Location
    Castle Hill, Sydney
    Posts
    7,475

    Default

    The ECU. Buy it or make your own! You can see in the pic which resistors have been changed and the value of them. I diode was also snipped to delimit the RPM.

    '92 205 Mi16
    '90 Mi16x4

  5. #5
    Fellow Frogger!
    Join Date
    Aug 2011
    Location
    Melbourne
    Posts
    184

    Default

    Quote Originally Posted by PeterT View Post
    The ECU. Buy it or make your own! You can see in the pic which resistors have been changed and the value of them. I diode was also snipped to delimit the RPM.
    Thanks Peter.

  6. #6
    Fellow Frogger! Valentia's Avatar
    Join Date
    Jan 2011
    Location
    Canberra
    Posts
    380

    Default

    Will it work with a Mi16 motor? If so I will take it.

  7. #7
    Fellow Frogger!
    Join Date
    Aug 2011
    Location
    Melbourne
    Posts
    184

    Default

    Quote Originally Posted by Valentia View Post
    Will it work with a Mi16 motor? If so I will take it.
    Hi, I'm not sure to be honest but the part number is there if you want to check.

    Cheers

    Jez

  8. #8
    VIP Sponsor
    Join Date
    Aug 2000
    Posts
    9,236

    Default

    No, it is Jetronic and for a DFZ engine.
    Your existing Motronic unit is far superior.
    Graham

    Quote Originally Posted by Valentia View Post
    Will it work with a Mi16 motor? If so I will take it.

  9. #9
    Fellow Frogger!
    Join Date
    Aug 2011
    Location
    Melbourne
    Posts
    184

    Default

    Quote Originally Posted by Jezwillow View Post
    Hi all

    Following the recent sale of my 205 I have a few bits and pieces laying around that hopefully someone else can put to use.
    1. I have a Bosch Jetronic ECU (p/n: 0 280 000 345) that has been remapped and came from PeterT. Didn't get around to fitting it so is as arrived from Peter. Asking $50.
    2. I also have what I think is a 205 CV boot. It is in god condition, uncracked and very pliable. Not entirely sure as it came with my 205. I'm sure one of the gurus here can identify it from 50 paces! Open to offers.
    3. I also have a harness bar that was custom made for the 205 body shell. It is a direct bolt in to the factory rear upper seat belt mounts. It is made from 2 inch steel tube so is pretty strong and has been powder coated in black. Asking $175
    4. I have a pair of red RPM 4 point harnesses which are in great condition. Dated 10/12/2009. Asking $175 for the pair. May consider bulk deal with harness bar.
    5. Finally, I have a set of 'Momo' pedal pads. Not sure if they are genuine or not but they are used and they look alright and are easy to bolt in and out. Asking $15.


    Drop me a pm if you are interested in any of these bits.
    I'm happy to receive reasonable offers and can post at buyers expense.

    Cheers

    Jez

    Click image for larger version. 

Name:	IMG_3439.jpg 
Views:	213 
Size:	100.0 KB 
ID:	40728Click image for larger version. 

Name:	IMG_3440.jpg 
Views:	205 
Size:	100.2 KB 
ID:	40729Click image for larger version. 

Name:	IMG_3441.jpg 
Views:	207 
Size:	97.8 KB 
ID:	40730Click image for larger version. 

Name:	IMG_3442.jpg 
Views:	215 
Size:	93.2 KB 
ID:	40731Click image for larger version. 

Name:	IMG_3443.jpg 
Views:	207 
Size:	86.6 KB 
ID:	40732Click image for larger version. 

Name:	IMG_3446.jpg 
Views:	212 
Size:	93.5 KB 
ID:	40733Click image for larger version. 

Name:	IMG_3447.jpg 
Views:	204 
Size:	93.0 KB 
ID:	40734Click image for larger version. 

Name:	IMG_3448.jpg 
Views:	219 
Size:	98.2 KB 
ID:	40735Click image for larger version. 

Name:	IMG_3452.jpg 
Views:	198 
Size:	88.3 KB 
ID:	40736
    Update
    The ECU has sold but the harness bar is back on the market due to apparent confusion about the price I specified.
    Harnesses are also still available and all items are open to reasonable offers.

    Cheers

    Jez

  10. #10
    1000+ Posts PeterT's Avatar
    Join Date
    Jul 2000
    Location
    Castle Hill, Sydney
    Posts
    7,475

    Default

    Could you please measure the inside and outside ID's of the boot?

    '92 205 Mi16
    '90 Mi16x4

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •