Wanted ID 19 Hub caps
  • Register
  • Help
Results 1 to 11 of 11
  1. #1
    DUS
    DUS is offline
    Tadpole
    Join Date
    May 2012
    Location
    Canberra
    Posts
    6

    Default Wanted ID 19 Hub caps

    I'm having trouble finding hub caps for my ID 19. I'm after four of any style that fit the 400mm wheels with the 3 pegs on them.
    Does anyone have any old hub caps laying around that you would like to sell or know anyone that would have any.

    Advertisement


    Any help would be greatly appreciated.

  2. #2
    mnm
    mnm is offline
    Croak croak... mnm's Avatar
    Join Date
    Dec 2010
    Location
    Sydney
    Posts
    3,222

    Default

    Hello

    I spotted these today on eBay.fr .

    http://cgi.ebay.fr/enjoliveur-citroe...5#ht_500wt_922

    Also these..same seller but different size

    http://cgi.ebay.fr/citroen-ds-enjoli...d#ht_500wt_922

    Not sure if they are what you are looking for or their restorability.. I've had lots of stuffed shipped from France off eBay... I just use google translate to make contact.

    Matthew

  3. #3
    Real cars have hydraulics DoubleChevron's Avatar
    Join Date
    May 2000
    Location
    Ballarat,Vic,Aust.
    Posts
    16,414

    Default

    You'll get gazumped around here if anyone has some on offer I think there's at least 3 of us now looking for a set of hucaps for 400mm wheels

    You could try ebay france, someone linked a really nice set for sale here recently.

    seeya,
    Shane L.
    'Cit' homepage:
    Citroen Workshop
    Proper cars--
    '85 Series II CX2500 GTi Turbo I
    '63 ID19 http://www.aussiefrogs.com/forum/citro%EBn-forum/90325-best-project-car-you-have-ever-seen.html
    '72 DS21 ie 5spd pallas (last looked at ... about 15years ago)
    '78 GS1220 pallas
    '92 Range Rover Classic ... 5spd manual.

    Yay ... No Slugomatics


    Modern Junk:
    '07 Poogoe 407 HDi 6spd manual

  4. #4
    1000+ Posts michaelr's Avatar
    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    1,393

    Default

    There was a guy in the Renault section of the French Car Day selling parts. He had three early hubcaps, but they were the ones with the spring steel cross bar for the wheels with two holes.
    Michael
    Member, Citroen Car Club NSW

    DS23 Pallas 5 sp. "Francoise" , BX19TRi Auto "Jacques Dutronc" , Teardrop Trailer "The Toad", BMW R65 "Rosamund"
    In the past: Renault 750, Dauphine, R4, R8, R10, Peugeot 504 Familiale, ID 19 (x2), Safari (x2)

  5. #5
    Fellow Frogger! Mort Subite's Avatar
    Join Date
    Jul 2002
    Location
    Sydney
    Posts
    620

    Default

    Quote Originally Posted by mnm View Post
    Hello

    I spotted these today on eBay.fr .

    http://cgi.ebay.fr/enjoliveur-citroe...5#ht_500wt_922

    Also these..same seller but different size

    http://cgi.ebay.fr/citroen-ds-enjoli...d#ht_500wt_922

    Not sure if they are what you are looking for or their restorability.. I've had lots of stuffed shipped from France off eBay... I just use google translate to make contact.

    Matthew
    hmmm
    I dont think these will fit the wheels DUS has, from my memory of Battle of Waterloo day, the wheelson his ID just take the alloy hubcaps that fit over and are held on by the three pegs - not that slip inside the rims like these ebay ones....
    CITROEN CAR CLUB of NSW - MEMBER. www.citroencarclub.org.au. . .www.facebook.com/CCCNSW
    08FD DSPECIAL "Dear Prudence wont you come out to play?"
    00FF7512 DS23SAFARI "Pull up to my bumper Baby, in your long black limousine."
    C2MY06 C2VTR "Go speed racer, Go"
    YDO005 MORRIS MINI DELUXE "The Mini Deluxe floats on fluid too"

  6. #6
    1000+ Posts gerrypro's Avatar
    Join Date
    Nov 2010
    Location
    Camperdown 3260 Australia
    Posts
    3,067

    Default

    Quote Originally Posted by Mort Subite View Post
    hmmm
    I dont think these will fit the wheels DUS has, from my memory of Battle of Waterloo day, the wheelson his ID just take the alloy hubcaps that fit over and are held on by the three pegs - not that slip inside the rims like these ebay ones....
    One can always grind off the pegs and drill the necessary holes for the spring clamps!
    Those caps still need some major work to make them look acceptable!
    Cheers Gerry

  7. #7
    Fellow Frogger!
    Join Date
    Jul 2011
    Location
    Castlemaine VIC
    Posts
    355

    Default Slough hubcaps

    I've had a search through the hubcaps that John and I have collected over the years. They are the large ones that cover the whole wheel and held by spring pressure. They can come "unstuck" if the wheel hits a bad pothole. Some are the chromed steel English ones that are a bit rusty.
    The problem is that they are dented in one way or another.
    With that thread on "how to panelbeat trim" not so long ago, it might be possible to make these like new again. "I doubt that", I hear my wife say. Well there you are. If I was you DUS, I'd try to chase up some good ones on EBay, but I could go through them again and photograph them if you were interested.
    We bought the large steel chrome ones from Sklennars in Hamilton New Zealand. A lot of Slough ID's went there. These hubcaps would look awesome if re-chromed. Good Luck Michael

  8. #8
    DUS
    DUS is offline
    Tadpole
    Join Date
    May 2012
    Location
    Canberra
    Posts
    6

    Default

    Thanks guys for the information and advice.
    If anyone has some damaged alloy hub caps i only need three of these, to fit the wheels with the pegs. I can straighten and polish these ones if anyone has any. Thanks Donovan

  9. #9
    mnm
    mnm is offline
    Croak croak... mnm's Avatar
    Join Date
    Dec 2010
    Location
    Sydney
    Posts
    3,222

    Default

    Hi there

    spotted these today..

    http://cgi.ebay.fr/Pour-CITROEN-DS-I...6#ht_500wt_922

    Matthew

  10. #10
    1000+ Posts gerrypro's Avatar
    Join Date
    Nov 2010
    Location
    Camperdown 3260 Australia
    Posts
    3,067

    Default

    They are for the later five stud wheel.
    Cheers Gerry

  11. #11
    Fellow Frogger!
    Join Date
    Mar 2005
    Location
    Brisbane
    Posts
    877

    Default

    There are some rather "experienced" 400 mm BIG hubcaps on Ebay at the moment. Two are original SLOUGH DS 19 types with the extra ring near the centre..the other two are probably able to be retrieved as they would be stainless steel and "could" be reshaped and polished.

    http://www.ebay.com.au/itm/Citroen-D...item41696ba641

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •