R10 - 1.4, 13inch mags, 10s dash $800
  • Help
Results 1 to 2 of 2
  1. #1
    Fellow Frogger! 750frog's Avatar
    Join Date
    Jan 2011
    Location
    Dubbo
    Posts
    125

    Default R10 - 1.4, 13inch mags, 10s dash $800

    R10 with a 1.4 BLOWN UP (was run without water till it stopped so it will be stuffed!)
    Mild camshaft
    R12 seats
    R10s dash
    13inch mag wheels - Good tyres 90% tread (IF YOU WANT THE WHEELS, BUY THE CAR!)
    Rust has been cut out
    Lowered front springs
    Carpet in boot and on floors

    6 DAYS NSW REGO

    The motor was run till it stopped on the M4 motorway having no water so it will be stuffed. Sold as is. Probably needs a new clutch or pressure plate. The car WILL NOT RUN at the moment but has been a daily driver.

    The front springs cut to level the car out and it has early R16 centres in the mag wheels with a fair bit of offset. Tyres are continentals.

    FOR AN EXTRA $200 YOU CAN GET A FULL SET OF GUARDS AND A REAR PANNEL FOR THE CAR.

    any questions email Sam at sambrent@live.com.au or call/SMS 0435 421 337.



    Car is located in EMU PLAINS at the end of the M4 near Penrith.










    No PM's as this is advertised for a friend, Cheers all

    Advertisement
    Last edited by 750frog; 3rd October 2011 at 07:51 PM.

  2. #2
    Fellow Frogger! 750frog's Avatar
    Join Date
    Jan 2011
    Location
    Dubbo
    Posts
    125

    Default

    The car is still available, all it needs is a pink slip and a new motor... a standard R12 motor would fit straight in, exhaust is set up for r12 headers, choke cable is from r10s with the original mounting in the car on the floor.

    Cheers,

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •